Shut down the computer, then press the paper button to eject the jammed paper. If the error does not clear, open the printer cover and remove all of the paper inside, including any torn pieces. Then, reload the paper in the sheet feeder and press paper button to resume printing.
Correspondingly, how do I clean the feed rollers on my printer?
- Turn off the product.
- Unplug the power cable.
- Disconnect any connected cables.
- Remove both paper cassettes.
- Place the product on its right side. …
- Use a soft, moist cloth to clean the cassette rollers shown here. …
- Return the printer to its normal position.
People also ask, how do I reset my Epson printer?
To Factory Reset an Epson printer:
- Turn off the printer.
- Press and hold the reset button on the back of the printer (normally located to the right of the ethernet port).
- Turn on the printer while holding the reset button.
- Wait until a message prints indicating that the printer is resetting.
How do you clean a paper path?
Cleaning the Paper Path
- Load a few sheets of plain paper in the product.
- Press the home button, if necessary.
- Press the left or right arrow button to select Setup and press the OK button.
- Press the arrow buttons to select Maintenance and press the OK button.
How do you clean dust out of a printer?
To clean your printer, you need rubbing alcohol, a cotton swab, a vacuum cleaner or canned air, and a clean cloth. If you see streaks or the paper is smeared, clean the platen or roller to remove built-up ink. Then use the vacuum cleaner or canned air to remove any remaining ink or dust particles from the printer.
How do you rejuvenate printer rollers?
Why does my Epson printer keep saying paper out?
It is possible that your ink cartridges are not aligned properly that why it gives the error warning. Move the carriage to the far left. It is also possible that the paper is not aligned well or exceeds the maximum paper capacity. Either way, just check your printer’s alignment.