If the problem isn’t resolved
- Turn off the power and unplug the power cord.
- Wipe the right and center paper feed rollers inside the rear tray with a moistened cotton swab. Rotate the rollers 2-3 times while wiping. …
- After cleaning the paper feed rollers, turn on the power, then clean the paper feed rollers again.
In this regard, how do I clean my Canon printer feeder?
Cleaning the Feeder
- Turn off the machine and unplug it from the power outlet.
- Open the original supply tray.
- Open the feeder cover.
- Wipe the rollers in the feeder.
- Close the feeder cover and original supply tray.
- Open the feeder.
- Wipe the document feed scanning area.
- Wait for the cleaned area to dry completely.
- Prepare the printer. …
- Open the printer driver setup window.
- Click Roller Cleaning on the Maintenance tab. …
- Select Rear Tray, and click OK. …
- Open the Rear Tray.
- Place a moistened cotton swab, etc. to one of the protrusions (A) of the feed roller shaft.
- Execute paper feed roller cleaning.
Similarly, how do I reset my printer out of paper?
Solution one: Reset the product
- With the printer turned on, disconnect the power cord from the rear of the printer.
- Unplug the power cord from the wall outlet.
- Wait at least 15 seconds.
- Plug the power cord back into the wall outlet.
- Reconnect the power cord to the printer.
- Turn the printer on.
How do you fix a printer that won’t feed paper?
Why does my printer say paper is not set correctly?
The paper is too slick for the product. The paper might not be engaged with the feed rollers. … The paper settings in the print driver do not match the paper loaded in the paper tray. The rubber paper-feed rollers are dusty.
Why is my Canon printer not printing when the ink is full?
If the print quality is poor or no ink is appearing on the page, it may be due to one of the following: Ink in the Bubble Jet (BJ) cartridge or tank has run out. Printhead nozzles on the cartridge may be clogged. Protective cap or tape may be attached to the cartridge.
Why is my printer grabbing more than one page?
Multiple pages being fed through the printer overlapping or in a stack occurs when the media fails to separate correctly in the tray. Common causes are issues with the print media, incorrectly adjusted paper trays and worn or contaminated feed or separator rollers.
Why isn’t my Canon printer printing properly?
If your Canon printer is not printing properly, it may be caused by a corrupt printer driver. Printer drivers should be up-to-date for security reasons. Also, out-of-date Canon printer drivers often cause printer issues, so it’s best to enable automatic updates on your printer driver for less hassle on your end.