The average cost for a Ford Explorer wheel bearing replacement is between $210 and $500. Labor costs are estimated between $111 and $141 while parts are priced between $99 and $359.
Simply so, how do you change a wheel bearing on a Ford Explorer?
How to Replace Rear Wheel Bearings on a Ford Explorer
- Place chocks under the front wheels of the Explorer, to prevent the car slipping while you are working.
- Remove the bolts from the back of the brake caliper bracket.
- Separate the upper ball joint from the wheel knuckle, by removing the nut and bolt.
- Remove the hub from the wheel bearing.
Beside above, what size is the axle nut on a 2004 Ford Explorer? It’ll either be a 35mm or a 36mm.
Subsequently, one may also ask, what does it cost to replace wheel bearings?
You will pay about $400, on average, for front wheel bearing replacement. The labor will be anywhere from $140-$180, while parts may cost as little as $200 or as much as $400. The difference in prices is due to the cost of parts for more expensive cars as well as the various fees that individual mechanics charge.
What size is the front axle nut on a 2002 Ford Explorer?
Front hub nut on 2002 explorer. Just measure it. It’s somewhere around 1 1/8 probably.
7 Related Question Answers Found
Can you replace just one wheel bearing?
If there’s no play or noise in the other wheel bearing, there’s no need to replace it. Both have the same number of miles so both have nearly the same wear. Bearings are not replaced as preventative maintenance, they are a repair item. Fix them as needed.
How long can you drive with bad wheel bearings?
The heat would crash the wheel completely. To avoid this situation, it is recommended to drive at the slower speed so that your wheel stays in action a few more hours. SO, while thinking how long can you drive on a bad bearing? You should not go more than 1000 miles as it might result in some bigger issue.
Can you drive a car with bad wheel bearings?
Q: Is it safe to drive with a bad wheel bearing? A: No. It can, in fact, be very dangerous to drive if one of your bearings is worn out, especially since it may cause the wheel to stop while driving. Additionally, a damaged wheel bearing puts a lot of stress on the hub, the CV joint, and the transmission itself.
Can I replace wheel bearing myself?
Wheel bearings are parts that allow the wheels on your vehicle to spin freely and with as little friction as possible. Changing your own wheel bearings is considered an intermediate job that can be done at home, but will need some speciality mechanic tools.
What does it sound like when a wheel bearing is going out?
The most common symptom with a bad wheel bearing is a loud noise coming from the tire or wheel of the vehicle. It will sound like metal grinding on metal and will get louder as the vehicle goes faster. A bad wheel bearing can lead to uneven tire wear, which means you will have to purchase tires sooner.
How long does it take to fix a wheel bearing?
Rear wheel drive, tapered roller bearing: about 15-45 minutes; wear gloves or spend another 10 minutes washing grease off your hands. Front wheel drive with pressed on bearing: 30–120 minutes depending on whether it can be pulled off and pressed in with a specialty tool.
Can I change a wheel bearing myself?
If you notice a humming or whirring noise while you are driving or your ABS light turns on, it may be time to change your bearings. You can save money by changing your own wheel bearings rather than going to a mechanic, but if you do so, use caution — the bearings may be small, but they’re very important.