What grade of sandpaper should I use to distress furniture?

Once your final paint coat is dry, you can start distressing it with fine-grit sandpaper. You can start with 180 grit sandpaper to see how you like the look, but feel free to experiment with other grits. The higher the number, the finer the sandpaper.

>> Click to read more <<

Just so, does refinishing antique furniture devalue it?

While emphasizing the value and beauty of an original finish in good condition, they should also advise the public that most furniture does not lose value when refinished, and that, in fact, this furniture should get a new finish when the old one loses its visual and protective qualities.”

Furthermore, how do you sand and stain antique furniture?

Use a coarse sandpaper, a sanding block or a power sander to strip the finish off the surface. Sand until the surface is smooth and most of the shiny surface is gone. Once the majority of the old finish is off, switch to a medium grit sandpaper and continue to remove any patches of finish still sticking to the wood.

Should I sand in between coats of Chalk Paint?

Lightly sanding between coats is a good rule of thumb for achieving a smooth finish on any painted surface, but the chalky nature of chalk paint makes it especially easy. To finish the surface, you’ll apply a thin coat of wax to seal the paint and add protection.

3 Related Question Answers Found

Should I sand or strip furniture?

Stripping a finish is faster than sanding to remove it. But more importantly, sanding cuts through stain and patina (the color changes in wood caused by light and oxidation), and it does so unevenly. …

What grit sandpaper should I use for polyurethane?

Polyurethane Finish Step#1: Start With a Thick Coating

Sand lightly with 240-grit sandpaper between coats, then let the last coat dry for at least 24 hours. This is standard practice with any wood finishing job, and is nothing out of the ordinary.

What is the best grit sandpaper for old wood with clear finish?

Fine grits close up the pores of the wood, so if you sand to too fine a grit, less finish will soak into the surface. Generally, if you’re using an oil or clear finish, you can stop sanding at 180 grit. Continue on to 220 grit if you’re using a stain or dye.