The model number will be 11 or 12 digits and can be found in one of many locations, including: by the starter, on the cylinder shield, on the metal shield, on the valve cover, above the spark plug, in front of the engine, above the muffler, or on the fuel tank.
Simply so, where is the date code on a Briggs and Stratton engine?
The code is stamped directly into the metal of a Briggs & Stratton engine. Collectors of antique engines often jump past the model and type numbers to read the date code first.
Similarly, where do I find my Victa model number? Each model manufactured has a label situated on the top of the air filter element cartridge which is either a ‘V” series or model number.
Also, where is the model number on my lawn mower?
This plate is located on the frame either in front or under the left from steering control arm. Search by model number and verify serial number when ordering parts and accessories for your mower.
Where is the part number on a Briggs and Stratton carburetor?
- Your Briggs & Stratton engine part numbers can be found in your engine’s Illustrated Parts Lists (IPL).
- The numbers listed next to the part illustrations in our IPLs are called Reference Numbers.
13 Related Question Answers Found
How can I tell what model my Briggs and Stratton engine is?
Briggs and Stratton MODEL NUMBER LOOKUP The model number will be 11 or 12 digits and can be found in one of many locations, including: by the starter, on the cylinder shield, on the metal shield, on the valve cover, above the spark plug, in front of the engine, above the muffler, or on the fuel tank.
How do you read a Briggs and Stratton engine number?
If you need to find your Briggs & Stratton engine information we can help! The number model system consists of three series of numbers. The first number you find will be the model number, the second number is the engine type and the third number is the code number.
How do I identify my Briggs and Stratton engine?
How Do I Identify a Briggs & Stratton Engine? The Model, Type and Code numbers, stamped directly into the engine, are used to identify our engines. Engines used in lawn mower applications usually have the model numbers stamped directly into the blower housing, muffler heat shield, or a few inches above the spark plug.
How do I identify my engine?
It’s all in the engine code (sometimes referred to as engine number) or vehicle identification number (VIN). You can find the VIN in the lower corner of your windshield on the driver’s side. In the series of numbers and letters, the tenth from the left denotes the model year and the eighth is the engine code.
How do I find the manufacture date of my engine?
Locate the engraved serial number on the side of the crank case. The Date of Manufacture (DOM) indicator may be found within the engine’s serial number. Locate the first four digits (all numbers) of the serial number.
How do you tell what year a lawn mower is?
By locating the serial number tag on your machine, you can easily determine your mower’s age. If you have the owner’s manual for your mower, you can also check the date printed on the inside of the manual. This date should be one year after the mower’s manufacture date.
Where is my engine serial number?
The engine serial number is on a metal plate attached to the block, typically found on the left-hand side of the engine. The position of the engine plate varies across different engine series. You can find the position of your plate using the table below.
Where do I find my MTD model number?
The model and serial number ID tag is located on the underside of the seat on an MTD riding mower.
How do I find my MTD model number?
The MTD model number can be found on your equipment’s identification tag, located in one of several places on your machine. This tag is approximately 2” x3” in size and also includes the product name, customer service address, and phone number.
How do I identify my Honda lawn mower?
If your Honda push mower is equipped with a Honda engine, the model and serial numbers may be found under the product housing, or sometimes on the right side of the engine. If your mower is a Honda HRM model, then the identification numbers are found on the back side, near the bagging system.
How do I read my MTD serial number?
Read the first character of the model number. Look at the second character, which will represent the type of mower or accessory. Read the third character to decode the year your product was manufactured. Write down the digits after the dash and before the letter on the end, if your model has one.
How do you fix a lawn mower that won’t start?
Your Mower Won’t Start: Loose, Dirty or Disconnected Spark Plug in Your Lawn Mower: Check it out, clean off debris, re-connect and tighten. Dirty Air Filter: Clean or replace. Fuel Not Reaching the Engine: Tap the side of the carburetor to help the flow of gas. If this doesn’t work, you might need a new fuel filter.
How do you start a Briggs and Stratton engine?
Grasp the handle of the starter cord, and pull sharply. The engine should turn over on the first pull, but if it doesn’t, pull repeatedly until it does. If the engine doesn’t start after five pulls, and you smell gas, let the mower sit idle for 10 minutes. The carburetor is probably flooded, and it needs to drain.