Open the Impala’s hood and locate the power steering reservoir. The reservoir is located on the top-center of the engine on the 3.4-liter engine and the rear of the engine compartment on the 3.8-liter.
Thereof, where is the power steering fluid located on a 2004 Chevy Impala?
The power steering reservoir is mounted/part of the power steering pump, at the top is a cap that screws off, a funnel is needed (available in any hardware store) to avoid spilling the fluid on the fan belt. The GM part # of the fluid is 89021184.
Subsequently, question is, where do you put power steering fluid in a Chevy Impala? Open the Impala’s hood and locate the power steering reservoir. The reservoir is located on the top-center of the engine on the 3.4-liter engine and the rear of the engine compartment on the 3.8-liter.
is power steering fluid universal?
Although a “universal” power steering fluid may be satisfactory for many applications, some vehicles do require special additives for seal and pump lubricity, and corrosion protection. The type of power steering fluid that is specified for your vehicle should be marked on the PS reservoir or filler cap.
How much is a power steering pump for a 2004 Chevy Impala?
The average cost for a Chevrolet Impala power steering pump replacement is between $363 and $479. Labor costs are estimated between $129 and $164 while parts are priced between $234 and $315. Estimate does not include taxes and fees.
9 Related Question Answers Found
Where do u put power steering fluid?
Locate the power steering reservoir. It is usually on or near the engine, and can have a white or yellow reservoir and a black cap. Wipe the reservoir clean with a towel or rag to prevent dirt from getting in while you work on it. Check the fluid level in the reservoir.
What color is power steering fluid?
Power steering fluid is usually a slight variant of automatic transmission fluid. Some manuals even call for using ATF in the power steering system. Red, pink, and clear are the usual colors. Black, dark brown are signs of contaminants.
How do you change a power steering reservoir?
Step 1 – Disconnect Battery Cable. Step 2 – Remove Belt from Pump. Step 3 – Remove Lines to Pump. Step 4 – Remove Power Steering Pump. Step 5 – Remove Reservoir From Pump. Step 6 – Install New Power Steering Reservoir. Step 7 – Replace Power Steering Pump. Step 8 – Fill with Fluid.
What is power steering?
In motor vehicles, a power steering system helps drivers steer the vehicle by augmenting steering effort needed to turn the steering wheel, making it easier for the driver to turn. Electric power steering systems use electric motors to provide the assistance instead of hydraulic systems.
How much power steering fluid does a car hold?
It holds 6.5 quarts, and doesn’t even come close to hanging below the cross member.
Where does power steering fluid go in 2009 Chevy Impala?
In the engine compartment of a 2009 Chevrolet Impala, you can locate the power steering pump by looking for the serpentine drive belt. It should be located near the top of the motor. On the power steering pump you’ll locate a small filler cap.
Where do you put power steering fluid in a 2008 Chevy Impala?
The 2008 Chevrolet Impala power steering fluid reservoir is located toward the rear of the engine compartment on the passenger’s side of the vehicle.
How do you drain power steering fluid?
Start by removing the lowest power steering line you can find, often at the steering gear, rack or cooling lines. Allow the system to drain completely, which may be a while due to the viscosity of power steering fluid. Once the system is drained, refill the power steering reservoir to ½ full.
Is there a recall on Chevy Impalas?
General Motors LLC (GM) is recalling certain model year 2014-2015 Chevrolet Impala vehicles manufactured May 7, 2014, to July 28, 2014. In the event of an accident, the center storage console may not stay latched. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard No.