FLOOD® PENETROL® Oil-Based Paint Additive is a free-flowing, low-odor, high quality penetrating oil-based paint additive which compensates for the adverse effects that weather and surface conditions have on paints and primers. Use in oil or alkyd-based paints, varnishes and primers.
Simply so, what is Penetrol used for?
It brings life back to faded wood stains, rejuvenates old dull plastics and fibreglass, and makes paint stick to almost anything. Penetrol stops and prevents rust, corrosion and oxidisation. It can be used in confined and damp areas and reduces fire and fume hazards.
Subsequently, question is, can Penetrol be used with water based paint? Penetrol cannot be used in 2-part chemical resistant coatings, Acrylic or other water based paint, chlorinated rubber or coal tar coatings. Always mix a small amount first, if not sure, to determine compatibility.
Similarly, it is asked, what is Penetrol made of?
PENETROL & MARINE PENETROL (same thing) is a low viscosity penetrating oil, composed mainly of Stoddard Solvent (a common ingredient).
How long does Penetrol take to dry?
24 hours
12 Related Question Answers Found
What is the difference between Floetrol and Penetrol?
Trying to bring life back to a hard top. Penetrol is for oil based paints, Floetrol for latex paints.
How do you use Penetrol?
Application Add Penetrol to oil-based paint or primers: Stir and mix oil-based paint thoroughly. Always mix a small amount of Flood Penetrol additive to paint that you are using to determine compatibility. As paint begins to set up too fast or “drag,” stir in Flood Penetrol.
Can I paint over Penetrol?
You are fine to paint over the Penetrol with water based paint, just make sure you wait till the Penetrol is dry. Should one use a primer over the Penetrol and if so should this primer be thinned with Penetrol also.
Can Penetrol be used on wood?
Re: penetrol Conventional varnish is best applied to new wood thinned 1:1 – 50% varnish. You may know that you do not use a paint stirer or shaker for varnish.
What can I spray on metal to prevent rust?
Apply A Protective Coating Dipping metal objects, such as clocks, into a bluing solution of water, sodium hydroxide, and potassium nitrate, provides strong corrosion resistance.
Will Penetrol stop rust?
Penetrol makes it easy to stop and prevent further rust This is how easy it is to use Penetrol. Just saturate the rusted surface with Penetrol until it has a shiny appearance. When dry, continue with any oil, alkyd or water based paint.
How much Penetrol do I add to paint?
Begin with approximately one pint (16 oz.) Penetrol per gallon of paint. 4. If paint is thick, or in extreme hot or cold temperatures, more Penetrol may be added (up to 2.5 pints per gallon of paint).
How do you seal rusted metal?
Everbrite will seal rusted metal to prevent further corrosion and will prevent rust stains. On most metals, two coats of Everbrite Clear Protective Coating are recommended. On raw steel or rusted metal, 3 to 4 coats are recommended because the metal is very porous.
How do I uninstall Penetrol?
To take the penetrol, off use zep commercial heavy duty floor stripper concentrate straight or in a 50 50 mix (available at lowes $9). Takes about 2 min for the Zep to dissolve the old hardened penetrol. Pressure wash it off.
Can Penetrol be used with polyurethane?
Penetrol is recommended for use in polyurethane by The Flood Company.
What is flood paint?
Founded in 1841 by a family of professional painters, Flood is a leading producer of specialty wood stain and paint additive solutions for consumer, commercial and industrial applications. Flood products are designed to restore, protect and beautify natural woods and other surfaces.
Can you use Floetrol in oil based paint?
If your paint is a high gloss paint you will want to consider mixing the Floetrol with water as floetrol can reduce the gloss of your coating if too much is mixed directly with the coating. Never use floetrol with oil based paints rather use a paint conditioner specifically formulated for water based paints.