To set up the Hue Motion Sensor, start by opening up the Philips Hue app on your phone and tapping on the settings gear icon in the top-left corner of the screen. On the next screen, tap on “Accessory setup”. Tap on the round plus button down in the bottom-right corner. Select “Hue motion sensor”.
Also question is, where should hue motion sensors be placed?
For example: Place the sensor at your front door and switch on the lights in the Hallway and Living Room when it detects motion, and only let it switch off the lights in the Hallway.
Furthermore, how does the hue motion sensor work? The Hue Motion sensor’s integrated daylight sensor detects when there is still enough daylight so that lights do not turn on until you need them. If it’s still too dark, adjust the light sensitivity of the sensor in the Philips Hue app to personalize when you’d like the motion sensor to activate.
Herein, how do I connect my hue motion sensor?
Setup and customization
- Open the Hue app.
- Head into Settings (looks like a gear in the top left corner).
- Tap Accessory setup.
- Tap the Add Accessory button (looks like a plus sign in the bottom right corner).
- Tap Hue motion sensor.
- Tap LED blinking to confirm the orange LED is blinking and begin the pairing process.
Does Hue motion sensor work with HomeKit?
Onto the Sensor itself and how you set it up; As this is a Hue motion sensor, it’s not directly compatible with HomeKit, so you are going to need the 2nd gen Hue Bridge for HomeKit functionality.
15 Related Question Answers Found
How do you bypass a motion sensor?
Most motion detectors have a built-in override: Normally the switch is kept on all the time. If you turn the switch off and on within a second or so, the light will stay on, and this overrides motion detection. To go back to normal operation, turn the switch off and wait ~10 seconds, then turn back on.
How do you trick a motion sensor?
Move slowly along the walls in which the sensors are located, and as low as possible, while proceeding forward. Many motion sensors have blind spots that make it difficult to detect movement directly underneath them. Be aware that another sensor may be pointing in your direction from the other side of the room.
Does Hue motion sensor work through glass?
Unfortunately, the Hue motion sensor is for indoor use only. You will not be able to use it outdoors. It is also not possible to place the motion sensor behind a window to control your outdoor lights, because the sensor can’t ‘see’ through glass.
How long do motion sensors last?
about one to two minutes
How does a motion detector work?
Passive infrared motion detectors (PIR) detect emitted infrared energy – given off by humans and animals in the form of heat. When there is a sudden increase in infrared energy, an alarm is sounded. The sensor in turn signals the control box, which can be programmed to emit a bell noise or sound an alarm.
How do I reset my hue motion sensor?
Philips Hue Motion sensor Press and hold the setup button (small hole at the back of the device) for 10 seconds. Orange blinking: sensor is resetted and ready for installation.
How do you use Hue formulas?
Activate this Formula using a Tap button press or a motion sensor. Once activated, your light will start from a relaxing dimmed scene and gradually change to the nightlight scene before turning off automatically. You can choose how long you would like to stay in each of the two scenes. Try it!
How many Philips hue bridges do I need?
How Many Lights can a Single Hue Bridge Support? Philips officials say that each Hue Bridge can control up to a maximum of 50 Hue bulbs, this can be a mixture of different bulbs, lamps and light strips, as well as switches such as the Hue dimmer, tap and motion sensors, however the maximum is 50 in total.
How do I reset my sensor light?
Turn the light switch on and off rapidly approximately four times. The light will eventually stay on continuously. Once the light is on, turn the switch off, wait five seconds and turn it back on again. The light should stay off and the sensor should be reset.
Why is my sensor light not working?
If the light won’t come on after adjusting and cleaning the sensor, try a simple trick. Turn off the circuit breaker that controls the light circuit and leave it off for 30 minutes. If the light doesn’t come on when you turn the breaker back on, try replacing the bulb. If that doesn’t work, the sensor may be bad.
How do you test a motion sensor?
Go to your motion detector and push the TEST button on the right side of the device, holding it down for at least two seconds to activate the test mode. The front of the motion detector will light up red to indicate it is in test mode. The panel will beep and indicate that the motion detector has been triggered.
Why does my motion light keep coming on?
Flickering motion sensor lights can be caused by several things: A bad bulb or diode. A pretty straight-forward problem, even high-quality lights tend to go out eventually and sometimes even new ones can malfunction. A bad connection between the bulb or diode and the light fixture itself.
Why is my motion sensor light blinking red?
The flashing red light on a motion detector indicates that the device is in its walk test mode. In this mode, a user can walk around the area and check to make sure that motion is being detected. To do this, simply remove the battery for the motion sensor. This will cause the device to power off.
Can you use Philips hue outside?
Just as long as the bulb is mounted in a moderately sheltered light fixture that protects it from rain, snow, hail, and other elements, then it’s fine to use a Philips Hue bulb outdoors. Just know that the bulb may not last as long as it could if it were used indoors in better conditions.
What is Lux setting on motion sensor?
• Light Level Adjustment (LUX) The LUX dial controls the natural light level that initiates operation and prevents the security light from operating during daylight hours. Your solar security light comes preset and will be activated when motion is detected at dusk.