- Cut a Hole in the Ceiling: Option A. Lay out your light placement before you begin, then use the template provided with your light kit to draw the outline for each opening.
- Cut a Hole in the Ceiling: Option B.
- Rough-In the Wiring.
- Wire the Light.
- Mount the Light.
- Add the Trim.
- Install Lightbulbs.
Keeping this in view, how do you install a ceiling light without an existing wire?
Hold a ceiling electrical box against the ceiling where you will install the fixture and trace the outline of the box. Cut a hole into the ceiling with a drywall saw. Place an old-work electrical box against the wall, between two studs, where you want to install the light switch.
Also Know, can you put recessed lights in an existing ceiling? Recessed lights can be installed from below the ceiling, as opposed to accessing the top of the ceiling and the ceiling joists from the attic, with the use of a specific type of a remodeling electrical box called remodeling recessed light housing.
Also question is, how do you wire two lights together?
You can do this light switch wiring in one of two ways. The most common is to daisy-chain the light fixtures by connecting them to each other and hooking the first one up to the switch. The other way to wire multiple lights to one switch is to connect all of them directly to the switch in a “home run” configuration.
How many pot lights do I need for basement?
Basements are dark. Even though it may seem like 5 lights should be plenty, one extra is probably the right answer. Yes, that means another $25 or so worth of lighting material. Yes, that means one more pot light to wire.
3 Related Question Answers Found
How do you can daisy chain recessed lights?
In the attic, run a wire from over the switch location to the first six-inch light, then to the next and so on until all six-inch lights are daisy-chained to the switch location. Daisy chain the two small lights back to the same location using a separate set of wires.
Should recessed lights be wired in series or parallel?
Your recessed lighting should not be wired this way, as it causes a drop in amperage to the light farthest from the circuit breaker in the series, and if one fixture fails, the others fail, similar to how when one light burns out in a strand of Christmas lights, they all fail.
What is the best lighting for a basement?
When it comes to lighting, there are 4 bulb types that are most used in the basement setting: incandescent, fluorescent, light-emitting diodes and halogen. Incandescent bulbs are very popular because they produce a bright, warm light that helps with creating a comfortable, cozy atmosphere.