Instructions
- Shut off power and gas. Unplug the power cord from the wall outlet and then close the gas supply shut-off valve.
- Remove the burner heads.
- Remove the main top.
- Remove the spark module.
- Install the new spark module.
- Reinstall the main top.
- Reinstall the burner heads.
- Reconnect the gas and power.
Regarding this, where is the spark module on a gas stove?
Depending on the make, style and model of your gas stove, you can locate the spark module beneath the stovetop or behind a panel along the back of the appliance. Consider replacing the spark module when your burners fail to light consistently.
Also Know, how does a stove spark module work? Spark Module The spark ignition system is actually a two-level system. The spark module produces an extremely high voltage with very low amperage. The spark produced is used to ignite a low-pressure gas flow to a flame pilot light that remains lit until the oven’s thermostatic control is turned off.
Additionally, how do I know if my spark module is bad?
To check it you can just bypass the switch to check it or check it for continuity when the valve is turned to the light position. If no reading on switch it is bad. If you do hear clicking and the other burners are sparking then the problem may be in the spark module (where all the spark wires originate).
How do you fix a spark on a gas stove?
You can fix this problem quickly so that your range passes with flying colors.
- Access the gas valve behind the stove.
- Locate the malfunctioning igniter on the stove.
- Rub a toothbrush across the malfunctioning ignitor to remove any residue.
- Insert a needle into the ignitor’s pilot hole, if equipped.
13 Related Question Answers Found
Why do oven ignitors fail?
The most common issue with gas burners is trouble getting the spark to ignite the gas. The issue can usually be attributed to a dirty igniter electrode, burner orifice, or porthole caused by a spill and general uncleanliness. Last year, we serviced 14.3% of gas ranges. Most service calls were due to failed igniters.
Why does the gas stove keep clicking?
One of the most common reasons a gas stove starts clicking is because the burner cap is out of alignment. Once the cooktop is completely cool, remove the burner grate to access the cap beneath it. Remove the cap and re-center it on the base. Try lighting the burner again.
How many igniters does an oven have?
On such a system there will be two ignitors, one for each burner. They may also employ a ‘dual’ gas valve (see illustration above) instead of using a separate valve for each burner.
Why do spark switches often fail?
Sometimes one or more of your spark ignition switches can fail. If one of the switches breaks down while the electrical contacts are closed, the switch will send a continuous signal to the spark module, resulting in a burner that keeps sparking continuously.
How do you troubleshoot a gas burner ignition?
How to Troubleshoot Gas Stove Burner Ignition Problems Turn the gas burner control knob to the correct starting point to ignite the burner. Clean the burner ports. Ensure the power cord is plugged in. Light the stove manually during a power outage by pushing down the burner knob and lighting the stove with a long-handled lighter.
How do you clean an oven igniter?
You may need to remove the bottom oven cover to expose the igniter. Clean the igniter with a toothbrush to remove dirt and debris. Gently scrub the surface of the igniter with the toothbrush and softly blow on it when finished to remove the debris. This will facilitate better sparking.
How does a gas oven igniter work?
The hot surface igniter is used in modern gas oven burners to open the gas valve and to ignite the gas. As the igniter draws electric current it will heat to a high temperature and glow, as well as cause the bi metal in the oven safety valve to warp and open the valve releasing the gas to be ignited.
How do you light a GE gas stove?
Locate the pilot in the back of the compartment. The pilot is attached to the left side of the oven burner. To light the oven pilot, push in and hold the oven control knob in for 1 minute before releasing. Put a lit match next to the pilot so that the pilot will ignite.
How do you turn off the igniter on a stove?
Food Debris Causing Igniters to Click When Off Unplug the power source. Remove the burner cap. Use a toothbrush or other small scrubber to remove/dislodge food. Around burner. Under knobs. Around igniter. Use a Q-Tip dipped in alcohol to get rid of the last little bits of buildup. Replace burner cap & get to cookin’!
How do igniters work?
When the button on a Piezo electric ignitor is pressed, a spring loaded hammer strikes quartz in order to create a spark. This is the typical process used in such lighters. This creates the necessary amount of voltage to generate a spark. Piezoelectric devices are much longer lasting than devices that depend on flint.
Do electric stoves have igniters?
Switches, control modules or igniters can go bad on a stove with electronic ignition. Spark ignition stoves need electricity to power the igniters. If your oven light turns on, you have power.
What is an ignition electrode?
Ignition Electrodes are used for the ignition of gaseous fuel in gas combustion equipment, which works on the principle of ignition by high-voltage flashover. Ionisation Probes are used as combustion sensors in gas combustion equipment. The central electrode is positioned permanently in the flame.
Can you manually light a gas oven with electric ignition?
In the case of a power outage, you can light the surface burners with a match on your electric ignition gas or dual fuel range or gas cooktop. Hold a lighted match to the burner, then turn the knob to the low position. The oven of your gas range is lit by electric ignition, eliminating the need for standing pilots.