How to Unlock a LG Tromm Washing Machine
- Locate the “Door Lock” indicator light on the LCD display to verify that the door is locked.
- Press the “Start/Pause” button on the front of the control panel to pause the current cycle.
- Activate the “Drain & Spin” cycle to drain the washer if it is full of water.
Just so, how do I reset my LG washing machine?
How to reset the washing machine:
- Press POWER to turn the washer off.
- Unplug the washer from the power outlet or turn the circuit breaker to the unit off.
- With the power disabled, press and hold the START/PAUSE button for 5 seconds.
- Plug the washer back in, or turn the circuit breaker back on.
Also Know, how do I bypass the lock on my LG washing machine? To do so, power on the machine, press the spin speed button until No Spin is selected. And then start the cycle. This will activate the drain only function on your LG front load washer. Once the water has drained pause or stop the cycle and the door will unlock.
Beside this, how do I turn off the child lock on my LG washing machine?
To deactivate the child lock, make sure that your washer is powered on and press and hold down the appropriate child lock button for 3 seconds. The Child Lock feature will turn off and the control panel will be reactivated.
How do I bypass the lock on my LG washer?
How to Bypass a Washing Machine Lid Lock
- Turn off the washer and unplug the appliance.
- Locate the retaining tabs and/or screws that hold the top horizontal panel down.
- Look for the lid lock switch on the underside of the top panel and where it fits into the appliance.
- Put the lid back down and plug the washing machine back into the electrical outlet.
5 Related Question Answers Found
Why won’t my washing machine door open?
Turning off the machine at the mains should allow the door lock to cool down and open after a few minutes. The most common cause is water left in machine. Try running a spin/drain cycle. If this fails, the machine can be drained by placing the washing machine drain hose lower than the drum (into a bucket or tray).
What is a magnetic door plunger?
The magnetic door plunger attaches to the inner door panel of the washer. It holds the door open when the washer is not running, and allows the door and tub seal to dry. This prevents mold and mildew from building up. If you’re getting water collected in the door, and the front drain it could be caused by this part.
How do you unlock a front load washer?
How to Manually Unlock a Kenmore Front Load Washing Machine Touch “Control Lock” for five seconds until “CL” disappears from the washer’s display to unlock the control panel. Press “Start/Pause” to manually pause the cleaning cycle. Pull the door’s handle to open the door and add or remove the clothing from the washer.
How do I reset my washing machine?
To perform the Master Reset, carefully unplug the washing machine from the power outlet and leave it unplugged for one minute. After one minute is up, plug the washer cord back into the wall. Next, open and close the door of the washing machine 6 times within 12 seconds to send a “reset” signal to all the components.
How does a washing machine door lock work?
When you shut the door, the latch on the door pushes inside the door lock onto a sliding bar which moves over and activates an electrical part inside which locks the door shut. At the same time, power is passed through the interlock on to the rest of the machine.