Secondly, can I refinish my hardwood floors in sections?
However, it is possible to refinish just a few boards if you are willing to accept that they might appear shinier or a slightly different color than the surrounding boards, at least until the new finish gets scuffed up enough to blend in.
In respect to this, can you hand sand hardwood floors?
How to sand a hardwood floor by hand? The exact same way you would with floor sanding machines, but with a lot more elbow grease! Start with a low grit like 40, climb to 60, 80 then 100. Use a handheld orbital sander, ideally with a gear-driven setting.
Can you sand down hardwood floors?
Flooring experts estimate that hardwood floors can be sanded for refinishing up to 10 times, depending on the thoroughness of the sanding and the level of wear and tear on the floor. Situations differ, but you may not be able to refinish your hardwood floor more than 10 times.
How can I refinish my hardwood floors without sanding?
The best way to refinish wood floors without sanding is to use a technique called screen and recoat. This involves scuffing up the finish with a floor buffer and applying a refresher coat of finish.
How difficult is it to sand hardwood floors?
There’s really no getting around it – sanding your floors is hard work and physically tiring. When you first start sanding you’ll almost instantly see a huge difference in your floor but once you’ve removed most of the varnish and dirt progress will seem so much slower.
How do you make old hardwood floors look new?
Refinish Hardwood Floors in One Day: How to Refinish Wood Floors Step by Step
- Step 1: Buy special hardwood floor refinishing kit. Refinishing kit and other tools. …
- Step 2: Clear the floor and clean the room. …
- Step 3: “Sand” the floor with liquid. …
- Step 4: Damp mop and touch up the floor. …
- Step 5: Apply the new finish…fast!
How do you prep hardwood floors for sanding?
How to Prepare a Wood Floor for Sanding
- Clear the Room Before Sanding. This is probably pretty obvious but before you begin sanding, you will want to remove all of the furniture and clear out the room. …
- Clean the Floor. …
- Hammer in the Nails. …
- Remove the Baseboards Before Sanding. …
- Protect the House From Floor Sanding Dust.
How do you sand and refinish hardwood floors?
How do you spot a hardwood floor with sand?
Apply a light coat of floor wax to the floor’s finish and buff it. Rub water stains with No. 000 steel wool to remove them from the surface. If the stains are too deep in the finish, gently sand with the grain of the wood using fine-grit sandpaper until the stain disappears.
How fine Should you sand hardwood floors?
Sanding your hardwood floors takes three sessions with progressively lighter grit sandpaper. To begin, use a coarse 30-40 grit, then a medium 50-60 grit, and finally a fine 80-100 grit. For flat floors, use a random orbital sander. This sander is easier to handle than a drum sander and eliminates directional scratches.
Is it difficult to sand hardwood floors?
Sanding hardwood floors might seem like a pros-only project. … And then there’s that big, scary sanding machine… But it’s really not that difficult. I’ve helped hundreds of homeowners—some of them complete DIY novices—successfully prep their floors for a new finish.
Should I sand my own hardwood floors?
Sanding wood floors is a time consuming but relatively easy procedure. Sanding wood floors & refinishing yourself will definitely save money, and even an inexperienced homeowner can likely do a better job than the lowest bidding handyperson who quotes on it.
What is the best sandpaper for sanding hardwood floors?
Start with 36-grit sandpaper for a floor that hasn’t been sanded in a long time or that has a lot of heavy finish on it. Floors that have been painted may even require you to go tougher and use 24 or 16-grit paper. Maple floors are so hard that they often require 36-grit sandpaper as well.
What kind of sander Do I need to sand my floors?
What kind of sander is best for refinishing hardwood floors?
What kind of sander to use on hardwood floors?
Random orbital sanders are the best choice for do-it-yourself hardwood floor refinishing. They take longer to remove old finishes than drum sanders, but they do not require a lot of experience to use and are less likely to damage your wood floor.