Standard toilet dimensions are typically between 28–30″ deep, roughly 20″ wide, between 27–32″ high, and have a rough-in between 10–14″. Now you can find the perfect toilet.
Likewise, people ask, are all toilet bases the same size?
Standard toilets will measure between 15 and 17 inches, while chair style toilets can be up to 17 inches. … Standard toilet rough in dimensions are 12 inches but can be anywhere from 10 to 14 inches in some cases.
Correspondingly, can you replace a 14 inch rough in toilet with a 12-inch rough in toilet?
Replace a 14-inch rough-in toilet with a 12-inch rough-in toilet. You can definitely replace a toilet with a rough-in of 14 inches with one with a rough of 12 inches. The problem with this method is that a 2-inch gap will be left between the toilet tank and the wall. Install an offset toilet flange.
How many inches off the wall should a toilet be?
#2: The Clearance From the Center of the Toilet To Any Adjacent Fixture or Sidewall. This measurement is 15 inches. That’s the minimum (you can have more). So looking at the toilet, make sure there are at least 15 inches of clearance from the center of the toilet to any adjacent fixture (or wall).
How much space is needed on either side of a toilet?
Toilets and Bidets
Most codes require at least 15 inches (measured from the center of the toilet) from any side wall or obstruction and not closer than 30 inches center to center to any other sanitary fixture. (The NKBA actually recommends 32 inches.)
Should a toilet tank touch the wall?
No, there is no standard distance a toilet tank should set out from the wall. There are standard rough in distances, the most common is 12″ with a few at 10″ and a few at 14″, but the actually distance the tank will be from the wall will vary.
What are the rough-in dimensions for a toilet?
What does 12 inch rough-in mean for toilets?
The toilet rough-in refers to the distance from the finished wall to the center of the toilet’s floor drain or waste outlet. Most toilets have a rough-in of 12 inches, although it’s not uncommon for older homes to have an unusual size such as 10″ or 14″. … Rear-outlet toilets are configured a bit differently.
What is the minimum width for a toilet?
Code minimums tend to be 21 inches. But as this allows less than two feet in front of the toilet, the NKBA recommends adding even more space: up to 30 inches, minimum.