Disconnect the printer from the local connection (USB not applicable to the network printer). Right-click on the driver and click Remove device. Restart your PC. Once the PC is ready, reconnect the USB while the printer is on, then let the plug and play reinstall the driver.
Correspondingly, how do I clear the Zebra printer cache?
What to do? Insert the ZPL Command for “Cancel All” into the ‘Start of Job’ section of the Advanced Printing Preferences: ~JA . This command will clear the buffer of all prior data.
- Make ports settings changes. Press the Windows logo key + R on your keyboard > type devmgmt.msc and hit Enter to open the Device Manager. …
- Make sure that your printer is Online. …
- Reinstall the printer driver. …
- Set the Print Spooler service to automatic. …
- Update Windows.
Beside above, how do I fix printer in error state?
Sometimes, simply restarting both your computer and printer can be the solution to the “printer in error state” issue. Power off your printer and computer completely, leaving them in this state for a few minutes, then turn them on again to see if the problem is gone.
How do I reset my Zebra gc420d printer?
Hold down the forward feed button on the front panel. The indicator light will start a flash sequence: 1, 1-2, 1-2-3, and so on. When it flashes four times, release it. This resets the printer to factory defaults.
How do you cancel a print job on zebra zt230?
How do you reset a Zebra LP 2844?
Place the cursor into the “Direct Command for Printer” box. Type in “^default” and then click on the “Send” button. Your Zebra printer will now revert back to its factory default settings.
How do you troubleshoot a Zebra printer?
RUN A PAUSE TEST PRINT
To do this: turn the printer off, hold in the pause button, and turn the printer back on. Keep the pause button pressed until all the lights flash once. This will load 9999 test print labels into the printer. Release pause and you are ready for troubleshooting.
What does Warning ribbon in mean on a Zebra printer?
Why is my Zebra printer not printing?
You need to check that the network cable is firmly plugged in the computer as well as the printer. To ensure the working of the network cable, you can check the lights blinking, indicating the network connection. If the lights on the printer are not ON, you can unplug the cables and plug it back in after some time.