Open the rear tray cover (A) and pull up the paper support (B). Open the feed slot cover (C). Slide the paper guides (D) to open them, and load the paper in the center of the rear tray with the print side facing up. Slide the paper guides (D) against both sides of the paper stack.
Keeping this in consideration, how do I change the paper on my Canon printer tr8520?
When you close the feed slot cover:
Register the paper size and the media type according to the loaded paper. To do this, tap on Page size to select the size of paper loaded in the rear tray. When the list of paper sizes appears, tap on the paper size that is loaded. Then, tap on Type to specify the type of paper.
- Set the original file on the platen glass or feeder.
- Press [Scan] and select , then press [OK] …
- In the Canon PRINT Business app home screen, tap [Scan]
- In the [Scan] screen, configure the scan settings required.
- Tap [Scan] to begin scanning and tap [Done] to finish.
Likewise, how do you copy on a Canon tr8520?
Solution
- Make sure printer is turned on.
- Load paper.
- Select Copy on the HOME screen.
- Select Standard copy. The Copy standby screen is displayed.
- Load original document on platen glass or in ADF.
- Specify settings as necessary. …
- Press the Color button for color copying, or the Black button for black & white copying.
How do you put glossy paper in a Canon printer?
Place your photo paper in the tray with the glossy or printable side facing down. Hold the paper by the edges to avoid fingerprints on the glossy surface. Slide the paper all the way in until it stops.
Where is the paper guides on a Canon printer?
If the paper is curled, bend the paper stack gently in the opposite direction of the curl to flatten it. Pull out the tray (A) from the printer and remove the cover (B). Slide the paper guide in front (C), and on the right (D) to open the guides.
Why won’t my Canon printer print from the cassette?
Make sure the setting are set to letter sized plain paper and the paper source is set to the cassette. … This Canon printer do NOT allow to set print paper source. It automatically set paper source to back paper feed, one page at one time. Very bad printer firmware.