Make sure the rear cover is completely on. When installed it should be flush with the back of the machine. After making sure there are no paper jams, reinstall the paper tray by slowly pushing the tray all the way in, you should hear a slight snap or click once the tray is seated properly.
Besides, how do I fix a paper jam on my Brother printer MFC j220?
Paper Jam
- Unplug the Brother machine from the AC power outlet (electrical socket)
- Turn the machine around and open the Jam Clear Cover (1). …
- Close the Jam Clear Cover. …
- Pull the paper tray (1) completely out of the machine.
- Look at the inside of the machine where the paper tray was.
- Turn off the printer, and unplug the power cord of the printer from the power supply.
- Remove the Cassette. …
- Set the printer upright with the left side down.
- Slowly pull the jammed paper out so that the paper does not tear. …
- Align the paper, then reload it in the Cassette.
Keeping this in view, how do you fix a jammed printer?
Remove the paper following the procedure below.
- Slowly pull the paper out, either from the Rear Tray or from the Paper Output Slot, whichever is easier. …
- Open the Rear Cover. …
- Pull the paper out slowly. …
- Close the Rear Cover.
- Reload the paper, and press the RESUME/CANCEL button on the printer.
How do you get rid of a fake paper jam?
Neal Poole
- Take the first paper clip and contact the lower two brass rectangles, this fools the device into believing the duplexer is installed, keep the contacts bridged (don’t remove your hand or the paper clip until Step 4.) …
- Press the “OK” button on the control panel to pretend the paper jam is cleared.
How do you reset a paper jam on a Brother printer?
Unplug your Brother machine from the AC power outlet (electrical socket). If the paper support flap is open, close it, and then close the paper support. Pull the paper tray (1) completely out of the machine. Pull the two green levers inside the machine to release the jammed paper.
Why does Brother printer keep jamming?
You may be putting too much paper into the paper tray. It should never be overfilled as it can often cause a jam. … Also, make sure the paper fits the tray and that it’s inserted correctly. Because the wrong size or incorrectly positioned paper can get stuck in the printer.
Why is my printer saying paper jam but there is no jammed paper?
Sometimes a paper jam error persists even though there is no jammed paper (false paper jam). Reset the printer, which might clear a false paper jam error, and then try to print again. With the printer turned on, disconnect the power cord from the printer. … Reconnect the power cord to a wall outlet and to the printer.