How deep should a concrete post be in the ground?

Dig your hole to the correct depth, allowing for the height of the fence panel and the gravel board. As a rough guide the hole should be a minimum 1/3 the height of the fence, so a 6 foot fence would need an 8 foot post in a 2 foot deep hole. Similarly, the hole should be three times the diameter of the post.

>> Click to read more <<

Accordingly, are concrete fence posts worth it?

Robust and sturdy: Concrete fence posts are much sturdier than timber, so you’ll have peace of mind knowing that your fence is well supported and the post will still be standing after a strong wind or storm. This makes concrete posts ideal for exposed areas.

Thereof, can pressure treated posts be set in concrete? Simply setting the posts in concrete does create a condition that will accelerate rot in the bottom of the posts. With pressure-treated posts, the rot will be slow. … Concrete should be poured around the post – no concrete under the post.

Beside above, how deep should an 8 foot post be in the ground?

Dig the hole using the post hole diggers, to about 2 feet, 4 inches. If your fence posts are 8 feet high, then 2 1/2 feet of the posts should go from the bottom of the post hole to the plumb line, and 5 1/2 feet of the post from the plumb line to the top of the fence.

How do you keep a post straight in concrete?

How do you make concrete posts?

How far apart should fence posts be?

Typically, fence posts are spaced between six and eight feet apart. The corner posts are set first. To align all of the posts in between, stretch a line from each corner post to work as your guide.

How heavy is a 7ft concrete post?

approximately 39kgs
Type Concrete Slotted Intermediate Fence Post
Length 2135mm (7ft)
Weight 39 kg

How many bags of quikrete do I need for a 10×10 slab?

90lb bag of concrete yields about 0.025 cubic yards, total required concrete quantity for 10 × 10 slab of 6 inch thick = 1.85 cubic yard , so number of bags of 90lb of concrete = 1.85/0.025= 74bags, therefore 10 × 10 slab of 6 inch thick, generally you need 74 bags of 90lb ready mix concrete.

How much concrete do you need per fence post?

Generally, for each fence post, you will need enough cement to fill a hole that is a third to half as deep as the post’s above-ground height and three times as wide (in diameter) as the actual post.

How much does a 8ft concrete post weigh?

approximately 44kgs
Type Concrete Slotted Intermediate Fence Post
Length 2440mm (8ft)
Weight 44 kg

How much is a concrete post?

Most fence post holes will need between 1 – 4 bags of concrete to securely hold the post in place. The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the fence post. Depth of the hole is one-third to half the above ground height of the fence post.

How much Postcrete do you need per post?

“Usually one bag of postcrete per post is enough, however you can use a two bags per post if you feel this is needed.

Is bitumen good for fence posts?

More Information. Black bitumen paint, when painted onto a dry wooden post, can help protect the post from harmful organisms. Coverage should be from about 50mm (2″) above ground level, down to about 400mm (16″) below ground level.

What is the difference between Postcrete and concrete?

Depending on its application, traditional concrete can take between 24-48 hours and 7 days to set properly and will reach its optimum strength after 25-28 days. Postcrete, on the other hand, is the name given to a post mix concrete, which is a ready to use blend of concrete ingredients that requires no mixing.

Leave a Comment