I found these results quite interesting, as I often hear people say that 0000 steel wool is somewhere between p600-1000 grit, but I found that it was much finer than that! In context of what 0000 wool is often used for, it makes sense that it wouldn’t be that coarse.
In this manner, can I use steel wool instead of sandpaper?
Steel wool can be used instead of fine sandpaper for many sanding jobs. The very fine strands of steel gently cut into the surface being sanded, removing an ultra-thin layer. … If you wish to “rub out” a final coat at the end of the finishing process, the finest steel wool is good for this job, too.
International Steel Wool Corporation suggests using #0000 steel wool, the finest grade available, to clean glass without water or other cleaning materials. … Scrub the shower door, rinse it off; then squeegee or dry off the remaining water.
Subsequently, how do you use 0000 steel wool on marble?
Water spots and rings – Buff the area with dry #0000 steel wool. Some substances like milk, fruit juice and alcohol can sometimes cause both staining and etching. First identify and remove the stain. Then wet the surface with water and sprinkle on marble polishing powder.
How do you use 0000 steel wool on wood?
Using a new (0000 or 4/0)) wool pad, apply some wood wax to the pad. Apply in curcular motion, going against the grain with just enough wax to coat the surface lightly. Rub thoroughly working it into hard to reach areas until the surface feels satiny smooth and not slick.
Should I use steel wool between coats of paint?
Use the finest gauge steel wool (0000) to sand between layers of oil-based paint (if using water-based paint, minute bits of leftover steel wool may rust) or to buff out the final coat of paint. It’s especially helpful when sanding atypical edges or beveling.
What can you use instead of 0000 steel wool?
Non-woven abrasive pads (Scotch-Brite is one brand name) were a great alternative to steel wool, much like cassettes were way better than 8-track tapes. Steel wool leaves behind little bits of metal. If you work with white oak, those can react with the wood and stain it purple, and steel wool residue can also rust.
What grit is P80 sandpaper?
80 grit abrasive particles average 201 microns while P80 averages 192. So P80 sandpaper is slightly more aggressive than 80 grit. Add to this that the Japanese abrasives scale is different than the other two, and the plot thickens!
What is the finest grit sandpaper available?
Macro Grit Sandpaper
| Grade | Description | CAMI |
|---|---|---|
| Fine | Cannot remove varnish or paint on wood | 100 or 120 |
| Medium | Medium to coarse surface texture after sanding | 80 |
| Coarse | Has the ability to remove material rapidly | 40, 50 or 60 |
| Extra Coarse | Quickens the removal of most materials rapidly | 24, 30 or 36 |