Paving an asphalt driveway costs $4,737 on average, with a range between $2,932 and $6,568. This project runs $7 to $13 per square foot, including $2 to $6 per square foot for materials and $5 to $7 per square foot for labor. If replacing asphalt, it will cost $8 to $15 per square foot.
In this manner, can I pave my own driveway?
Making your own asphalt driveway is hard work, and not a job for one person. If you have friends who will help you, it is possible to save a lot of money by doing your own driveway, even after the cost of rental equipment is factored in.
Also question is, how do you fill asphalt driveway cracks?
How long does a asphalt driveway last?
The life expectancy varies based on climate, traffic, and maintenance. It is possible to have asphalt pavement last 25-30 years, but this depends on how strong the base is, the soil types underneath, how well those soils drain, how think the original road, parking lot, or drivewaywas paved.
How much is a truckload of asphalt?
Bulk asphalt cost per truckload
A bulk truckload of asphalt costs $500 to $1,800, including delivery fees. Tandem trucks carry 13 to 20 tons of asphalt that cover 550 to 850 square feet with a layer 3 to 5 inches thick.
How often should I seal asphalt driveway?
Is 2 inches of asphalt enough for a driveway?
For a regular driveway which is going to be used by regular cars, bicycles and bikes; 2 inches of asphalt is thick enough. Generally for resurfacing, 2 inches of asphalt is just about right, but if you are going for a stone surface and need a good base, it is better to layer up the asphalt thicker, around 3 inches.
Is 3 inches of asphalt enough for a driveway?
Residential driveways typically use 2 to 3 inches of asphalt with 3 being suitable for occasional large trucks or heavy equipment. Underneath the asphalt you should have 6 to 8 inches of granular base aggregate.
Is an asphalt driveway cheaper than concrete?
Cost. The cost of an asphalt driveway is typically cheaper than concrete, costing $2.00 – $4.00 per square foot. … In contrast, a concrete driveway costs between $4.00 – $6.00 per square foot for a standard installation.
What are the 3 types of asphalt?
There are three main types of asphalt: Hot Asphalt, MC Cold Mix, and UPM. There are also different varieties of these asphalts for summer and winter use. Below is a brief overview of each type of asphalt.
What is the best time of year to lay asphalt?
What is the cheapest type of driveway?
Advantages of Aggregate Driveways
Pound for pound, aggregate is the cheapest of these four common driveway materials. A basic gravel driveway can cost as little as $0.50 per square foot – an order of magnitude less than a professionally installed asphalt, stone, or concrete driveway.
What is the difference between asphalt and blacktop?
Asphalt generally refers to major highways and streets, whereas, blacktop is commonly used to refer to driveways and residential roads. … Blacktop has a higher mixture of stone than asphalt. It also must be heated to a higher temperature, around 300 degrees, than other types.