Set up anywhere in the office using the LaserJet Pro 400 M401dn built-in wireless networking and share printing resources on a network.
| Weight | 24.2 lbs |
|---|---|
| Dimensions | 14.49 × 14.35 × 10.67 in |
| Copy | No |
| Color scan | No |
| Fax | No |
In this manner, can the LaserJet Pro 400 M401dn print color?
The LaserJet Pro 400 M401dn Network Monochrome Laser Printer from HP outputs up to 35 pages/minute. The printer’s high 1200 dpi resolution (black and color) and 50,000-page monthly duty cycle are ideal for small to mid-size offices looking to cut costs by printing in-house, saving the time and money of outsourcing.
Load the document onto the scanner glass or into the document feeder. From the Home screen, touch the Copy button. Touch the arrows to change the number of copies, or touch the existing number and type the number of copies. Touch the Black or Color button to start copying.
Subsequently, how do I connect my HP Laserjet m402dn to my network?
Press and hold the wireless button until it starts blinking to make the wireless light blink. Check whether your press the WPS button on your wireless router within two minutes as the network connection between the printer and wireless network automatically. The software and driver installation can be started.
How do I connect my HP LaserJet Pro 400 to WIFI?
How do I connect my LaserJet Pro 400 to my computer?
If you plan to use a USB cable to connect the product to the computer, it will be connected during the software installation.
- Touch the Setup button on the control panel.
- Touch the System Setup item to open the menu.
- Touch the Energy Settings item.
- Touch the Sleep Delay item.
- Touch the Off item.
How do I install HP Laserjet 400?
How do I print a configuration page on HP LaserJet Pro 400?
Press the OK button on the control panel. Press the left arrow to highlight Reports, and press OK. Press the left arrow to highlight Configuration Report, and press OK to print the product configuration and Jetdirect pages.
How do I reset my HP LaserJet Pro 400 M401n?
Cold Reset HP LaserJet M401:
- Turn the product off.
- Perform one of the following steps: – LCD control panel models: Simultaneously press and hold the right arrow button and the Cancel button. …
- When the Permanent Storage Init. …
- When the product has finished the NVRAM initialization, it returns to the Ready state.
How do I scan on HP LaserJet Pro 400?
How do I setup my HP Laserjet Color 400 m451nw wireless?
Touch the “Wireless icon” on the control panel and then open the Wireless menu. 4. “Select” Wireless Setup Wizard and “wait” until the printer detects the network.
How do I setup my HP LaserJet Pro 400 M401dn wireless?
Link speed and duplex settings (touchscreen control panel)
- On the Home screen, touch the Setup button.
- Scroll to and touch the Network Setup menu.
- Touch the Link Speed menu.
- Select one of the following options. Setting. Description. Automatic. …
- Touch the OK button. The product turns off and then on.
Where is the IP address on a HP LaserJet Pro 400?
Print a configuration page, and locate the IP address. Open the HP Device Toolbox by clicking the Start button, clicking the Programs or All Programs group, clicking HP, clicking the product group, and then clicking HP Product Settings. Click the Networking tab to obtain network information.