Make sure your devices are properly connected with each other, and the network or the cable you use to connect these devices is normal. You can also try restarting your HP printer. Turn it off completely and unplug the power cord, leave it for a couple of minutes, and then plug the cord back and power on the printer.
Keeping this in view, how do I change my HP printer IP address?
To change your printer IP address, type its current IP address into the address bar of a web browser. Then go to the Settings or Network page and change your printer’s network to a static/manual IP address. Finally, type in the new IP address.
Besides, how do I change the IP address on my HP LaserJet printer?
Open the Embedded Web Server (EWS) by opening an Internet browser page, type the IP of the printer on the address bar and press Enter. The web page of the printer will pop-up. Click Networking tab, change the required IP address, subnet mask, and gateway.
How do I connect my HP Laserjet printer to my phone?
Simply install the HP Smart app on the phone or tablet and set up the printer’s connection to the wireless network. After that, you can send print jobs from the Android mobile device when it is connected to the same wireless network as the printer.
How do I connect my HP printer to my phone?
Add a printer using Wi-Fi Direct: On your printer, make sure Wi-Fi Direct is turned on. On your mobile device, tap All printers > Add printer, and then tap HP Print Service or HP Inc. Tap Directly to the Printer, select the name of your printer with DIRECT in the name, and then tap OK.
How do I connect my printer via Wi-Fi?
How do I hook my phone up to a printer?
Start your mobile application and tap the Settings icon. (Mobile Cable Label Tool users must also tap [Printer Settings] – [Printer].) Select the printer listed under [Wi-Fi Printer]. You can now print from your device wirelessly.
How do I reset my HP Deskjet 4050?
How do I reset my HP printer back to factory settings?
1 Restore Defaults
- From the screen on your printer, navigate to Setup.
- Tap Tools.
- Tap Restore Defaults.
- Tap Yes.
- The printer will restart.
- Once restarted, your printer will have been reset to factory default settings.
How do I setup my HP printer on my network?
Place the printer near the Wi-Fi router. Open the Setup, Network, or Wireless settings menu, and then select Wireless Setup Wizard. Select the name of your network, and then enter the password to complete the connection.
How do you cold reset a printer?
Turn off the printer. Turn it on and hold the green checkmark button until all three lights are on. When the lights are on, stop pressing the checkmark. When Select Language appears, press the Up Arrow button to select Cold Reset and press the green checkmark button again.
What is a hard reset on HP printer?
To restore the product to the factory-default settings, follow these steps.
- Turn the product off. Disconnect the power cable from the product for 30 seconds and then reconnect.
- Turn the product on while you press and hold the Resume button for 10-20 seconds. The Attention light turns on.
- Release the Resume button.
Why does my printer not print anything?
My printer won’t print
Make sure there is paper in the tray(s), check the ink or toner cartridges aren’t empty, the USB cable is plugged in or the printer is connected to Wi-Fi. And if it is a network or wireless printer, try using a USB cable instead.
Why is my printer not printing even though it has ink?
Check if the vents of the cartridges are clogged. … Try using a different ink cartridge to determine if your printer is able to recognize cartridges. If your printer used to work with an old cartridge, try installing that old cartridge again and see if your printer produces any sort of output–any shade of gray will do.