Use 180-grit sandpaper to sand the plywood. Stroke the sandpaper over the plywood in the direction of the grain 3 to 4 times. Further sanding can create too many grooves in the surface and cause the layers to peel up from the ends of the plywood. This grit addresses any imperfections in the wood.
Thereof, can you sand plywood edges smooth?
(I also use it to fill pocket holes!) Start by thoroughly sanding the edges of the plywood, then apply a coat of the Dry Dex or compound and let it thoroughly dry. Sand the edges with 220 grit sandpaper, then finish as desired. The edges are smooth as silk!
- Vacuum and wipe down the plywood with a damp cloth.
- Sand the plywood lightly with a 220 grit sandpaper.
- Apply a good quality wood grain filler and allow to dry.
- Sand plywood lightly again with 220 grit sandpaper.
Consequently, should I sand plywood before painting?
Plywood, just like any other wood, requires preparation before painting. … Sand the plywood until it is smooth using your sanding block or a handheld oscillating tool with a sanding accessory. Start with 80-grit sandpaper on a rough surface to begin the process and move to the progressively finer grits of 120 and 220.
What is the best way to sand plywood?
The best way to sand plywood is to manually work over its surface with 180 grit sandpaper. Move the sandpaper in steady strokes along the grain (not against it). If the plywood surface needs more sanding, switch to a finer grit sandpaper, and go over the plywood again.
What is the finest sandpaper for wood?
Use 60- or 80-grit for aggressive, fast wood removal. Use 100-grit for all-purpose sanding and 120 or 180 for the finest finish, but follow power-tool sanding with hand sanding.
What kind of paint do you use on plywood?
Semi-gloss paint which is used for cabinets and door is pretty durable without a top coat. If you use satin or flat plaint, you would need a top coat. You can also use acrylic paint or chalk paint – just be sure to seal them appropriately at the end.