The waterslide decal paper is a special transfer paper that you can easily use to transfer an image or text. The best things about this paper is that is translucent and can be used on almost any smooth surface.
Thereof, can you use sublimation ink on waterslide paper?
Also, can you use waterslide paper on paper?
1. Before you begin, it is important to note that clear waterslide decal paper is best applied on light colored surfaces. … Print a test copy of the desired image on a normal sheet of paper. If the image is not satisfactory, simply adjust your printing options until the image comes out as you like.
Can you use waterslide paper with inkjet printer?
HIGHEST QUALITY – Our Waterslide decal paper is the highest quality in the market. … The A4 decal papers will run smoothly through any inkjet printer with no fading or smudging.
Do you have to epoxy over water slide?
If you run your finger over a waterslide decal you will barely be able to tell that its not part of the surface itself. This is one of the reasons why waterslides are so popular for creating custom tumblers, though a layer of epoxy over the waterslide is required to protect it from wear and tear.
Do you need to seal waterslide decals?
Do you need to seal all types of waterslide decal paper? You only need to seal Inkjet waterslide paper (printed using an inkjet printer) and both clear and white inkjet waterslide must be sealed. … For laser printed decals, you MUST use a laser printer to print the image and then can simply skip the sealing part.
How do you print a water slide?
How do you protect waterslide decals?
To protect decals after application, spray over decal and application surface with a clear coating spray. We suggest one of the previously mentioned sprays. We cannot guarantee the performance of any other clear coat. You must first apply 2-3 very thin mist coats over the decal; allowing it to dry each time.
How do you put waterslide paper in a printer?
Place one sheet of the Water Slide Paper – the “shiny“ side is the side that will be printed– in your printer. The Water Slide Decal Paper should be fed into your printer one sheet at a time. It should be fed alone. No other paper should be present in your printer.
How do you use water transfer paper?
Is waterslide paper permanent?
Absolutely! Once properly applied and completely dry, the Waterslide Transfers are permanent.
What ink do you use for waterslide decals?
Print the design using 7200 Series Lacquer Screen Ink colors. A 230 tpi mesh (90 tpcm) is recommended for this application.
What is the difference between clear and white waterslide paper?
Clear waterslide is a translucent, see through, paper. The translucent decal paper allows for the edges of the decal to blend in and essentially disappear. … White waterslide is opaque, not see through. This allows your printed image to stay vibrant regardless of the color base it is placed on.
What setting should I print on waterslide paper?
Set your printer on all three of the following settings: Plain Paper, Normal Quality, Portrait Mode. Remember to use the Water Slide Decal Paper with inkjet printers only. Make sure you allow the printed sheets to dry completely before you touch them.