Go Kart Clutches and Parts
| Centrifugal Clutches | ||
|---|---|---|
| SKU | Description | Price |
| 115485 | CLUTCH 3/4″B 12TOOTH #35 CHAIN | 19.50 |
| 115487 | CLUTCH 3/4″B 10TOOTH 40/41/420 | 19.50 |
| 115484 | CLUTCH 5/8″B 11TOOTH #35 CHAIN | 19.50 |
Likewise, people ask, are centrifugal clutches good?
Greater engagement speed control – The centrifugal clutch progressively engages to increase torque from the engine to the load. This ensures a much longer lifespan and more energy saved on startup.
Hereof, how can you tell if a centrifugal clutch is bad?
How do I choose a centrifugal clutch?
How do I choose a Go Kart clutch?
You’ll always want to ensure that you have the ideal gear ratio for your go-kart. The gear ratio is calculated by dividing the number of teeth on the rear sprocket by the number of teeth on the clutch sprocket. For example, if you have a 10-tooth clutch sprocket and a 60-tooth rear sprocket, the gear ratio is 6:1.
How do I know what gear ratio for my go kart?
To determine your gear ratio, simply divide the rear axle sprocket by the clutch sprocket, so in the case of the above example, 60 divided by 12.
How long do centrifugal clutches last?
Improper installation of the centrifugal clutch can result in its failure as quickly as in a couple of minutes. Still though, even if installed properly, it won’t last more than five years maximum.
How much weight can a centrifugal clutch handle?
What type of clutch is used in mopeds?
A centrifugal clutch uses centrifugal force for engagement and disengagement of clutch to drive shaft. Centrifugal clutch is used in automatic transmission. The centrifugal clutch is often used in mopeds, mini bikes, automatic scooter, lawnmowers, go-carting etc.
Where are centrifugal clutches used?
Centrifugal clutches, which use centrifugal force to convey a movement correctly, are primarily applied to industrial machineries such as sweepers, mowers, chainsaws, generator sets, motor pumps, lawn mowers or fans. Moreover, they are also applied to refrigeration systems and mini-karts.
Which is better centrifugal clutch or torque converter?
Torque converters are great for lower end torque, as they have the ability to adjust the gear ratio depending on the engine’s RPM. … On the other hand, a regular clutch maintains the same gear ratio all the time. This makes it more suitable for lightweight or racing go-karts that are tuned for maximum speed.
Why is my centrifugal clutch getting hot?
Your clutch may be overheating due to several reasons. One of the most common reasons is a lack of lubrication. If your clutch is not lubricated properly, there is no agent that helps to reduce friction and disseminate heat.
Why is my centrifugal clutch smoking?
When a part of your go-kart is smoking, an investigation into the reason is required before more damage occurs. The most common cause, usually the main culprit, is that the clutch is engaging, but it’s not fully grabbing. It is generally due to the engine not being powerful enough to get through the engagement stage.