Right-click the Printer icon located on the bottom right-hand corner of the main computer screen. Select Open HP Photosmart Series Toolbox. Click the Print A Test Page button.
Moreover, how do I check my printer for problems?
Microsoft Windows users
- Open the Control Panel.
- Click or double-click the Printers, Printers and Fax, or Devices and Printers icon.
- Right-click the printer you want to test and select the Properties or Printer Properties option. …
- In the printer’s Properties window, click the Print Test Page button.
- Load plain paper in the input tray.
- On the printer control panel, press and hold the Resume button for 3 seconds. A Configuration Report prints.
Beside this, how do I print a test page on HP 2300?
Printing a self-test report
- Turn the printer on.
- Press and hold down the Power button.
- While holding down the Power button, open and shut the lid of the printer four times.
- Release the Power button. The self-test prints. note:
How do I print a test page on my HP Deskjet 1020?
How do I read a test page on my printer?
Print a Test Page
- Press the “Power” button on your printer to turn it on. …
- Click the Windows “Start” button and select “Control Panel.”
- Click “View Devices and Printers” under the Hardware and Sound section.
- Right-click your printer and select “Printer properties.”
How do you troubleshoot a print problem?
Try following these steps to get your printer back online.
- Check to make sure the printer is turned on and connected to the same Wi-Fi network as your device. …
- Run a printer power cycle. …
- Set your printer as the default printer. …
- Clear the print queue. …
- Reset the service that manages the printing queue.
What is a internal test page print?
The internal tests can be used to verify that the printer internal firmware is functioning properly. … It is always preferable to perform all these tests when the communication cable has been disconnected from the printer, and after having turned off and on the printer.
Why is my HP printer not printing the whole page?
Click on your printer and then click Manage. Under Manage your Device, click on Printing Preferences. Click the Paper or Paper/Quality tab. … Try to print the page again and check if you are able to print full page.