Check the condenser coils to determine if they are dirty—if the condenser coils are dirty, clean them. The condenser fan motor draws air though the condenser coils and over the compressor. If the condenser fan motor is not working properly, the refrigerator won’t cool properly.
Simply so, why is my Kenmore Elite fridge not cooling?
You could have a bad compressor or a lack of Freon (refrigerant). If there is no frost on the evaporator and the compressor is not running even though the evaporator fan is running, then you could have a problem with the compressor, the start device on the compressor or the wiring.
Furthermore, why is my refrigerator running but not cooling? Clogged coils can cause poor cooling. Check to make sure nothing is stuck in the condenser fan and that it spins freely (models with coils on the back won’t have a fan). To do this, unplug the fridge and pull it out. Plug in the fridge and make sure the fan runs when the compressor is running.
Subsequently, one may also ask, how do I reset my Kenmore Elite refrigerator?
How to Troubleshoot Resetting the Display on a Kenmore Elite Refrigerator
- Locate the refrigerator breaker in your service panel.
- Turn off the refrigerator breaker, or unplug the power cord.
- Restore power to the refrigerator to complete the reset.
Does Kenmore Elite refrigerator have a reset button?
Most Kenmore Elite refrigerators with an ice dispenser and water fountain built into the freezer door have a display that provides information regarding the fresh food and freezer compartment such as the internal temperature. In this instance, you must reset the refrigerator to reset the display.
11 Related Question Answers Found
How long do Kenmore Elite refrigerators last?
Fridges used to have an average lifespan of 25 years, and most had a warranty of 10 years. They now have an average lifespan of 7-10 years, and the warranties have been reduced to 1 year.
How long does it take a Kenmore Elite refrigerator to get cold?
24 hours
How do I reset my refrigerator compressor?
How to Reset the Compressor on a Fridge Locate the refrigerator power cord on the back of the appliance. Disconnect the power cord from the wall outlet. Turn both the fridge and freezer controls to “Off” or “0” inside the fridge. Adjust the fridge and freezer controls to the desired setting. Allow the fridge up to one day to adjust to a stable temperature.
How do I know if the compressor is bad on my refrigerator?
Shake n’ Tell for a Bad Compressor Grab a flathead screwdriver, pull your fridge away from the wall, and unplug it. Find the panel on the side of the compressor; it’s held by one or two screws. You’ll see a device called a starter relay switch, which you should unplug from the compressor.
How do I know if my refrigerator needs freon?
Locate the refrigerator’s condenser and place your hand next to it to sense heat. If the condenser feels cold and the refrigerator has been running, there may be a lack or absence of Freon. The problem may also be due to a defective condenser or clogged system.
What would cause a refrigerator to stop getting cold?
Clogged coils can cause poor cooling. Check to make sure nothing is stuck in the condenser fan and that it spins freely (models with coils on the back won’t have a fan). To do this, unplug the fridge and pull it out. Plug in the fridge and make sure the fan runs when the compressor is running.
Why is my Kenmore freezer not freezing?
The freezer in a Kenmore freezer may not keep food frozen for numerous reasons such as frozen evaporator coils, leaky refrigerator hoses, a too-crowded freezer, a clogged defrost drain or a malfunctioning or broken thermostat.
What does ER if mean on Kenmore Elite refrigerator?
The Er IF error code indicates that the main control board detects that the ice compartment cooling fan is not working. This will cause a lack of cooling in the ice compartment and will normally result in no ice production.
How do I increase refrigerator cooling?
10 Ways to Improve the Energy Efficiency of Your Refrigerator (and Freezer) Replace the Rubber Seal on the Door. Protect Your Fridge From High Heat Sources. Tidy up Your Condenser Coils. Cool Off Your Leftovers. Keep the Doors Closed. Take Advantage of In-Door Water & Ice. Organize & Remove Clutter From Your Refrigerator.
How do you know if your fridge is broken?
Warm food or a defrosting freezer are the obvious signs a refrigerator is malfunctioning. Check for power lights on the water or ice dispenser, if the refrigerator is so equipped. Open the doors and check for lights inside. Listen for sounds of the fan running.
How much does it cost to replace a compressor in a refrigerator?
What’s the Cost to Replace a Refrigerator Compressor? The cost to replace one is between $300 and $550, dependent on the cost of the item and labor. If a compressor has a faulty relay switch repairs can cost roughly about $50 to $200. If money is a problem then this is an easy solution.