5 Best 10-inch Miter Saws 2020 – Reviewed:
- Bosch CM10GD 10 Inch Miter Saw – Top Pick. Check Latest Price on Amazon.
- DEWALT DW713 Miter Saw. Check Latest Price on Amazon.
- Hitachi C10FCG Mitre Saw – Best for the Money. Check Latest Price on Amazon.
- Evolution RAGE3 10 Inch Miter Saw.
- Chicago 10 Inch Sliding Compound Miter Saw.
Keeping this in view, what is the most accurate miter saw?
A Comparison of our Favorite Picks:
| Model | Price | Rating |
|---|---|---|
| DEWALT DWS780 (Best Overall) | Check Price | 4.9/5 |
| Makita LS1016L | Check Price | 4.7/5 |
| DEWALT DW715 (Best Value) | Check Price | 4.6/5 |
| Hitachi C10FCE2 | Check Price | 4.3/5 |
Beside above, do I need a 10 inch or 12 inch miter saw? The 10-inch miter saw is pretty popular and with good reason. A 10-inch blade will spin faster than a 12-inch blade, resulting in smoother cuts. Equal motors powering the two blades will result in a higher RPM rate on the 10-inch blade and higher RPMs mean a finer finish.
One may also ask, what is the best Mitre saw for home use?
5 Best Mitre Saws for Homeowners – Reviews 2020:
- DEWALT DWS779 12″ Homeowner Miter Saw – Top Pick.
- Makita LS1018 Homeowner’s Miter Saw.
- DEWALT DW715 Mitre Saw – Best for the Money.
- Hitachi C10FCG Home Miter Saw – A Bargain.
- Kobalt SM1850LW Mitre Saw.
What can a 10 inch miter saw cut?
Miter Saw. A saw with a 10-inch blade makes right-angle cuts across a board 5 1/2 inches wide, sufficient for two-by-six lumber. The same 10-inch saw will cut a two-by-four at a 45-degree angle. Manufacturers also make 12-inch versions, which have a maximum cut of about 7 1/2 inches, wide enough for two-by-eights.
18 Related Question Answers Found
Is festool Kapex worth the money?
Yes, it’s the best miter saw you can get (short of some specialized tools costing even more) but as a first Festool, the money is probably better spent elsewhere if you have other needs in your shop. I say this as a very happy Kapex owner. The Kapex, IMO, is the least distinguished of the Festool lineup.
Do I really need a sliding miter saw?
Because the saw head slides out on rails, it can’t offer the arc range a non-slider can – the head bumps into the rails. If you want to cut extreme angles, a slider isn’t the best choice. And it will come as no surprise that a sliding miter saw will almost certainly cost more than a non-sliding one.
How do you cut a 60 degree bevel on a miter saw?
First, place your miter saw on top of your work bench and adjust the saw to 30 degrees. Make sure the fence is securely locked in at 30 degrees, as you’ll need a perfect 30-degree jig to get a proper 60-degree angle for your finished product. Before you get to cutting, make sure you’re wearing appropriate safety gear.
How do you cut a 60 degree angle on a miter saw?
The miter saw head can swivel for miter cuts, and the miter saw table can tilt for bevel cuts. However, a typical miter saw cannot cut a 60-degree angle. You can solve this problem by adding a wedge block (jig) to the fence in order to attain a 60-degree angle cut.
How do you find a miter angle?
To calculate the proper miter angle for trim-work moldings, simply divide this angle reading by 2. In the example shown, the inside corner is 90.5 degrees—nearly square. The precise miter angle of your moldings should be 45.25 degrees.
Is a miter saw worth it?
Miter saws are (obviously) great for making quick and accurate miters (like 45-degree angles for picture frames), and they’re also very efficient for cross cutting small pieces of material like trim (molding, baseboards). That makes them completely incapable of ripping boards to width (cutting them lengthwise).
What is the best sliding miter saw for the money?
View the Best Sliding Miter Saw for the Money, Below. DEWALT DWS780. Festool Kapex KS 120. Hitachi C10FCG. Evolution Power Tools RAGE3. Bosch GCM12SD. WEN 70712. DEWALT DWS709. Milwaukee 6955-20.
How do you cut a perfect miter joint?
How to Cut Miters Set the Angle. Set your saw to 45 degrees. Miter Cut the Ends. Make a cut on one end of each of the four frame pieces. Cut the Other Four Miters. With the mitered offcut clamped in place and acting as a stop block, you can now cut the remaining four miters.
Can you cut a 4×4 with a 10 inch miter saw?
?Cutting a 4×4 using a 10-inch miter saw isn’t advisable for a lot of reasons. There is the possibility of a kickback from the saw, the process is stressful & time-consuming, and the torque of the 10-inch miter saw isn’t suited for tasks of this kind.
Can I use a miter saw as a chop saw?
Miter Saws Miter saw use teeth with blades to cut angles. It can do the 90-degree cut as a chop saw, but it can also do angles, bevels, and compound cuts at all different slants. If you’re making picture frames, trimming out doors and windows, or putting in moldings, a miter saw will be a lifesaver.
Do I need a miter saw if I have a table saw?
With a table saw, you push your wood across the blade. While miter saws sometimes come with extensions for the sides, a table saw does not require a larger blade to produce a longer cut. Some table saw and miter saw uses overlap. You can complete short, straight cuts with both machines.
How big of a board will a 12 inch miter saw cut?
Saws start to differ when you look at their blade diameter—commonly 10 inches or 12 inches. The bigger the blade, the deeper and wider its maximum cut. Typically, a 10-inch miter saw will cut a 2 x 6 at 90 degrees and a 2 x 4 at 45 degrees; a 12-inch miter saw will cut a 2 x 8 at 90 degrees and a 2 x 6 at 45 degrees.
Is a 10 inch miter saw big enough?
A 10-inch blade can up to six inches worth of materials. For most woodworking projects, this is fine; however, for larger projects such as replacing a deck, a 12-inch miter saw may be needed. Check out the Hitachi C10FCE2 10-inch miter saw.
How wide of a board can a 10 inch miter saw cut?
A typical 10-inch power miter saw can crosscut a board up to about 5 1/2 inches wide.
What size of miter saw do I need?
Unless you are cutting very large baseboards, I would recommend sticking with a 10 or 12-inch miter saw. A 10-inch miter saw can very easily and very accurately cut 6-inch baseboards. However, if you already have a 12-inch miter saw, that is perfectly fine for cutting baseboards.
How much can a 10 inch sliding miter saw cut?
10-inch Sliding Miter Saw Cut Capacity They usually range between ten or twelve inches. The bigger the blade of the saw you use, the wider and deeper the cut you will be able to make with it. The ten-inch blade has a limited cutting capacity and will only allow you to cut up to a six-inch piece of wood.
How deep can a 10 inch table saw cut?
The blade raising mechanism on most saws can raise the arbor until the flange almost touches the underside of the throat plate, which is usually about 1/8 inch thick. Generally speaking, a 10 inch saw can cut slightly over 3″ deep. A 12 inch saw will cut 4 inches deep.
Should I get a 10 or 12 miter saw?
Trim is seldom more than 4 inches, so you’ve got plenty of wiggle room with a 10-inch miter saw. A 10-inch blade will spin faster than a 12-inch blade, resulting in smoother cuts. Equal motors powering the two blades will result in a higher RPM rate on the 10-inch blade and higher RPMs mean a finer finish.