Re: Status Code 580 With Digital Adaptors
Hello all, error code 580 is a common error that you will see when your equipment is having an issue connecting to our back end system.
Herein, how do I fix Comcast status code 580?
Re: status code 580 Do what John suggested of power cycling the box by unplugging for 20 seconds and plug back in. If the issue is still there after that, and it’s only one box with the issue, then you should replace the box either by trading it at a Cable Store or having a tech visit.
One may also ask, what does suddenlink status code 580 mean? Status Code 580 This error either means that your cable box is set to a channel not currently in your cable package or that your equipment needs an authorization signal sent to it.
Similarly, you may ask, what does IPST mean on Xfinity?
Those codes mean that you don’t have a good/usable signal. I am a Retired Official Comcast Employee.
What is Comcast status code 225?
The status code 225 is shown when there is an interruption in the signal. The signal can be interrupted because of many things. Cable signal might not be able to reach you because of some issues in Comcast backend, it might be because of your house wiring, it can be because of lines outside the house etc.
19 Related Question Answers Found
What does Comcast code 340 mean?
Set-Top Box Status Code 340. The cable connection is working (I plugged in the X1 box from the living room that is working fine to the coax cable in the bedroom and it connects fine). Screen message says ‘device not activated’, ‘check cable connection’. Coax cable is finger tight; everything else is connected properly.
How do I refresh my Comcast TV signal?
Performing a System Refresh on X1 Press the A button on your remote control, or visit the Help section in Settings. Highlight the System Refresh tile, and press OK. Please remember that performing a System Refresh will interrupt all X1 TVs and recordings in your home for up to 10 minutes.
What is Comcast status code 101?
Re: What is the solution to Status Code 101 and 221 on the little boxes. Hi geotuna — Those status codes indicate a lost in signal. We can start by pushing a new signal to your box(es). If that does not help, then it is recommended to either have the box replaced or have a tech come look at the box and outlet.
Why does my cable say not authorized?
The Not Authorized message will typically appear when you are attempting to view channels which are not included with your Digital or HD subscription plan. Occasionally, this error can also occur when channels have been recently added to your Digital Box and the signal for the update has not yet been received.
What is Comcast code RDK 03004?
X1 Error Code: RDK-03004 – Unable to Connect to XFINITY. To restore your X1 service,unplug the cord on the X1 box from the electrical outlet. Wait 30sec before plugging the cord back into the outlet.
What does XRE stand for Comcast?
Customers also reported about the issue on the Comcast’s X1 customer forum, identifying errors labeled “RDK 00104,” “RDK 03006,” and “XRE 00250.” The RDK is the Reference Design Kit, the preintegrated software bundle in all X1 boxes, while XRE stands for Cross-platform Runtime Environment, a platform-independent
What does PSt mean on my Comcast cable box?
Re: PSt display on cable box Hello TheMonster, RDK-03004 means your cable box cannot establish a connection with an upstream signal.
Why does my cable box say case?
Re: X1 DVR Case error Which means it’s not communicating outside of the house, it is a troubleshooting step to rule out your equipment. If the modem is having an issue and your cable box is having an issue, then it’s a good bet the problem is your account or like he mentioned outside of your house.
What does RDK 03117 mean?
RDK-03003 – Unable to Connect to XFINITY TV – X1 Error Message. When this error occurs, you will see the following message on your device: “We’re having trouble connecting to the X1 Platform”
How do I fix my Comcast RDK 03004?
To resolve this issue, you may need to try the following: Ensure cable connections are tightly secured. Unplug TV Box from electrical outlet. Wait 10 seconds, then plug back in to restart.
What does E 1 mean on my TV?
E1 means water supply error. Make sure that the source water tap is turned on.
What does OBV 055 mean?
OBV-055 comes up when the box doesnt have a connection to the network. By plugging in your ethernet cable from the ps4 to the mini then you might be causing this as this port is meant to feed the mini and not the other way around.
How do I reset my Arris cable box?
Reboot your receiver by unplugging the power cord and allow at least 60 seconds before plugging it back in. Allow at least 20 minutes for the receiver to fully recover and then turn it back on.
What do you do when your cable box wont turn on?
Restart Your Cable Box Disconnect the power from your cable box by either unplugging the power cord from the wall outlet or from the back of the box. Wait 30 seconds. Reconnect the power cable to your cable box or outlet. Wait 3 – 5 minutes for the box to reset. Turn on your TV and cable box.
How do I reboot my optimum cable box?
To reset your cable box, simply unplug it from the wall outlet. Wait about 30 seconds, then plug it back in and allow the box to go through the reboot process, which should take about three minutes. If you can’t reach your power cord, reset your cable box this way: Turn the cable box power on.
How do I reset my TDS cable box?
Reset the set-top box by unplugging the power cord for 30 seconds. Plug it back in and the set-top box will reboot within 5 minutes (10-15 for DVR models). Refer to your TV Manual to ensure all cables are connected properly. Verify HD channels are provisioned for your account by calling TDS at 1-866-44-TDSTV.
What does v58 mean on TiVo?
V58. TiVo Error Code Text. “This channel is not authorized. Contact (your cable provider) for more information.” The error is displayed when tuning to a channel, entering Live TV, selecting a program in the Guide. This message means the data is locked for that cable channel.
How do I fix my suddenlink Ref Code s0a00?
Reset the digital box Unplug the power cable from the back of the Digital Box. Wait 30 seconds. Reconnect the power cable. After a few moments you can power the Digital Box back on and test it.
How do I reset my x1 box?
Restart Using the Power Button Ensure your cables are tightly secured. Press and hold the Power button located on the front of the TV Box for 10 seconds. The TV Box should automatically restart.