The Rachio Generation 1 controller is not waterproof. If your location calls for outdoor installation, we require the use of a waterproof enclosure. You can order the Rachio recommended enclosure on Amazon.
Regarding this, does Rachio have a monthly fee?
There are no monthly or annual subscription costs associated with the Rachio controller.
One may also ask, how do I wire a Rachio controller? Install
- Attach the Rachio to the wall. Use the four (4) mounting screws (provided).
- Wire it up. Use the photo from your old timer to reference how your wires should be installed in your Rachio.
- Plug it in. Light One should start blinking; once solid (will take about 30 seconds), proceed to Connect Step (above).
Secondly, does Rachio require subscription?
Are there any recurring costs to run the Rachio 3 Smart Water System? Nope! There are no monthly or annual subscriptions, the app is free to download at any time, and all software and firmware updates are automatically updated for you for the life of the product.
Can Rachio be installed outside?
Rachio controllers can be installed outdoors by using a Rachio Weatherproof Outdoor Enclosure. Our outdoor enclosure protects your controller from the elements and keeps it safe from water damage.
6 Related Question Answers Found
Can Rachio work without Internet?
If for some reason you temporarily lose internet connectivity, your Rachio controller will attempt to reconnect to your home’s network every 30 seconds for 24 hours, at which point it will go offline. This way, your lawn won’t be without water if you lose internet for any reason!
How do you wire Rachio 3?
Step-by-Step Instructions Remove old controller. Test your old system to ensure everything works properly. Mark screw locations. Connect your wires. Power it up. Create an account. Connect to Wi-Fi. Complete setup on the app.
How do I contact Rachio?
1-844-472-2446
How do I manually run Rachio?
Manually Run Specific Zones From the Home screen, select the “Zones” tab. Tap the zone you would like to run to open the zone card. Select the number of minutes you would like to run the selected zone, then tap “Run.” Repeat these steps for any additional zones you would like to run.
What is a common wire sprinkler?
The “common wire” is run in series and is connected to all the valves in your system. The “hot wires” are run from each zone at the controller to each valve in your lawn/property. Therefore each zone is operated independently through the controller.
How do you program Rachio?
In the Rachio app, select the “Calendar” tab from the bottom navigation bar. Tap “Add Schedule”. You will then be asked to select the type of schedule you want to create. You will be asked to select which zones you’d like to add to the schedule.