36 horsepower
Moreover, what years were Ford 2000 tractors made?
Ford 2000
| 1962 – 1975 | |
|---|---|
| Model years 1962-1965 1965-1975 | |
| Utility tractor | |
| Next model: | Ford 2000 |
| Series next: | Ford 4000 |
Furthermore, how much oil does a Ford 2000 tractor hold? Ford 2000 – engine
| Engine Detail: Ford gasoline 3-cylinder liquid-cooled 157.95 ci [2.6 L] | |
|---|---|
| Bore/Stroke: | 4.20×3.80 inches [107 x 97 mm] |
| Starter volts: | 12 |
| Oil capacity: | 8 qts [7.6 L] |
| Coolant capacity: | 13.2 qts [12.5 L] |
Then, how much horsepower does a Ford 3000 tractor have?
It has a 3-cylinder OHV, water-cooled engine. It could be ordered with a Ford-built 158-cubic-inch gas or 175-cubic-inch diesel engine. It was rated at 37 horsepower at the PTO.
How wide is a Ford 2000 tractor?
Ford 2000 – dimensions
| Ford 2000 Tires: Ag front: 5.50-16 Ag rear: 11.2-28 Ag front: 6.00-16 Ag rear: 12.4-28 13.6-24 16.9-24 | |
|---|---|
| Wheelbase: | 75.8 inches [192 cm] |
| Length: | 126.5 inches [321 cm] |
| Width: | 63.375 inches [160 cm] |
| Height: | 79.75 inches [202 cm] |
13 Related Question Answers Found
How much horsepower does a 8n Ford Tractor have?
The 8N features a 23.22 belt horsepower with a 27.32 maximum. The tractor has 92 ft-lbs of torque, reached at 1,500 rpm.
How do I tell what year my Ford tractor is?
You should see five numbers and digits. The first digit will tell you what year the tractor was built in. Ford tractors have a special system to designate the year of production. The number 5 will refer to the year 1965, the number 6 will refer to the year 1966 and so on.
How much does a 3000 Ford tractor weigh?
Ford 3000 Tractor. Here is what we know about the Ford 3000 Tractor. It has a 3 cylinder Ford Engine with optional diesel or gasoline engines. Its two wheel drive and four wheel drive models weigh 3700 pounds.
How many horsepower is a Ford 2600 tractor?
38 horsepower
Where is the serial number on a Ford 4000 tractor?
4000 Serial Numbers: Location: Left side, behind starter on clutch housing.
How much does a Ford 4000 tractor weight?
The Ford 4000 tractor has a category 1and 2 three point hitch and a claimed pto of 46 hp. The Ford 4000 shown to the left with a mower attachment and weighs 3400 pounds.
How much does a Ford 3600 tractor weight?
Ford 3600 Tractor. Here is what we know about the Ford 3600 Tractor. It has a 3 cylinder Ford diesel or gasoline engine and this model weighs up to 6900 pounds. This Ford tractor has a two wheel drive and four wheel drive chassis.
How do I tell what year my Ford 3000 tractor is?
The model number, serial number and tractor production code should all be stamped onto the bell housing of the transmission on the right side of the tractor (when sitting on the seat looking forward) and just aft of the starter. The engine date code is May 15, 1973.
What is PTO hp?
The PTO horsepower is the amount of horsepower available for running implements with your tractor, like a bush hog. Most tractors have a Power Take Off shaft, which is what connects to your implements to power them. For example, a tractor with 45 engine hp might only have 34 PTO hp to run your implements.
Where is the serial number on a Ford 3000 tractor?
The numbers are relevant to Ford tractors manufactured between 1965 and 1975, located on the right hand side of the tractor on the flywheel housing, just rearwards of the starter motor.
Is a Massey Ferguson 135 a good tractor?
The Massey Ferguson 135 is one of (if not THE) best tractor Massey ever made, with one important point: be sure you get the right engine. The MF 135 was offered with either a gas Continental engine or a Perkins engine that was offered in either gas or diesel. The engine choice makes all the difference in the world!
How much oil does a Ford 3000 tractor hold?
Ford 3000 – engine Engine Detail: Ford gasoline 3-cylinder liquid-cooled 158 ci [2.6 L] Bore/Stroke: 4.20×3.80 inches [107 x 97 mm] Starter volts: 12 Oil capacity: 8 qts [7.6 L] Coolant capacity: 13.8 qts [13.1 L]
What kind of oil does a Ford 2000 tractor use?
Best choice is to use an oil of type UTF (Universal Tractor Fluid) or UTTO (Universal Tractor Transmission Oil). You use these types both for transmission and rear axle (hydraulics). Most brands have them. By the way, you need 12.5 Litres for the trans and 24 Litres for the rear axle.