A small table: 5 to 6 yards of 60-inch-wide fabric or 6 to 8 yards of 45-inch-wide fabric. A standard-size armchair: 4 to 6 yards of 60-inch-wide fabric or 8 to 10 yards of 45-inch-wide fabric. A dining room chair: 3 yards of either 45-inch-wide or 60-inch-wide fabric.
Similarly one may ask, how do I calculate how much fabric I need?
Figure out how much fabric you need with this formula:
- Width of fabric divided by width of one piece equals the number of pieces that fit into width (rounded down to the whole number).
- Total number of pieces divided by number of pieces that fit into width equals number of rows you need.
Subsequently, question is, how do I figure out how much fabric I need for upholstery? Measure the couch or chair cushion’s width and length seam-to-seam. Don’t forget to calculate the measurements for the cushion side panels. One yard of fabric equals 36 inches, and it takes about 2 yards for each cushion, allowing 1 inch for seams, when you lay the individual pieces out to fit the 54-inch wide fabric.
Also, how much fabric do I need for dining room chairs?
Most dining room chairs can be covered using a piece of fabric 27 x 27 inches; therefore, plan to use a piece of fabric 27 inches long by 54 inches wide, or about three-quarters of a yard for two chair seats, which does not allow for pattern placement matching but is a general rule.
How do you measure for a slipcover?
How to Measure a Sofa for a Slipcover
- Measure the Length. First, measure your sofa from the outside of one arm to the outside of the other arm.
- Measure the Seat Cushions. Measure the cushion width in the front of the sofa.
- Measure the Width of the Sofa. Measure the outside edge and width.
- Measure the Cushion Height.
- Measure the Full Height.
9 Related Question Answers Found
Do it yourself reupholster a chair?
Strip Chair. Using a staple puller/remover, gently remove fabric, staples and trim from chair (Image 1). Cut Fabric Panels. Pin removed panels of fabric to new upholstery fabric (Image 1). Upholster Chair. Upholster Chair Back. Upholster Outside Arms. Trim Fabric, Apply Trim.
How do you measure fabric to recover a chair?
If your chair is larger than average, measure the width the same way as you would measure the length at its widest point. If you have more than one chair that you are reupholstering, multiply the number of chairs by 0.75 and divide by 2. This will give you the total amount of yardage you will need for your chairs.
What is the best fabric for slipcovers?
Canvas, cotton duck, twill blend, medium weight denim Canvas, cotton duck, denim and twill blends are by far the most common choices for slipcovers. They are very durable and can be easily washed at home.
How do you make a slipcover for a chair?
Buy more muslin than you think you’ll need, even as much as one-third more. Take off the chair’s cushion. Starting with the outside back of your chair, measure the width and length. Add 4 inches to your width and length measurements and cut your muslin piece. Pin it to the back of the chair with straight pins.
How do you figure yardage?
The formula: Number of Cubic Yards = Length (in feet) Width (in feet) Depth (in feet) รท 27. Simply multiply the three dimensions together to find the number of cubic feet, then divide by 27 to find the number of cubic yards.
How do you recover a Parsons chair?
Fold the corners like you’re wrapping a present and staple underneath. Lastly, do the back of the seat cushion. Take the fabric and start at the top of the chair. Fold the top cut edge under and then staple around the top edge.
How do you make a slipcover for a chair with wooden arms?
Directions for a Slipcover for a Chair With Wooden Arms Cut the muslin large enough to cover the seat of the chair plus 12 inches on each side. Trace the seam line of the existing chair cushion plus 1/2-inch seam allowance. Cut a 5-inch band of muslin that is long enough to wrap around the perimeter of the chair plus 12 inches.
Can you reupholster leather dining chairs?
Leather chairs are elegant, comfortable and expensive. When the leather upholstery gets cracked, dry and brittle, however, don’t toss your chair to the curb. Instead, remove the old covering and reupholster the chair with a new one to preserve it.
How much fabric do I need for a slipcover dining chair?
A standard-size armchair: 4 to 6 yards of 60-inch-wide fabric or 8 to 10 yards of 45-inch-wide fabric. A dining room chair: 3 yards of either 45-inch-wide or 60-inch-wide fabric.