For a basic 480 square foot driveway, you can expect to pay $80 to $115 for sealing. For a larger 1,000 square foot driveway, contractors typically charge between $170 and $240 for sealcoating. Prices depend on whether you get one or two coats and most will charge a minimum fee of $100 to $200 for the project.
Also, is sealing a driveway worth it?
Sealing the driveway yearly can lead to unsightly hairline cracks and peeling. And concrete driveways should be sealed every four or five years to protect them from water penetration and to prolong their life. Many people believe that concrete driveways don’t need maintenance, so they may never apply a sealer.
Additionally, how much does it cost to top coat a driveway? Asphalt overlay costs $3 to $7 per square foot for standard materials. This project, often called a “top coat,” runs less because it involves a thinner layer on top of an existing surface. Asphalt sealant costs about $500, and should be done at least 6 months after the top coat.
Also question is, is it hard to seal a driveway?
Driveway sealer will splash onto your garage door and sidewalks as you pour it. And it’ll get all over your shoes and clothes. It’s very difficult (often impossible) to remove later, so wear old work clothes and shoes.
How long do you stay off driveway after sealing?
During the summer months of May through August we recommend staying off the driveway with vehicles for 48 hours. After September 1st allow 72 hours or more depending on the temperature.
19 Related Question Answers Found
How long does it take to seal a driveway?
Depending on how long is your driveway. For a short driveway ~ 50 feet, usually it takes a just a few hours (pre-wash and then seal). It takes a least 24hrs for it to dry. How long it lasts depends on the sealant you used.
What happens if you don’t seal your driveway?
Unfortunately the driveway sealers do not have the ability to span these cracks. 4. Chemicals, some chemicals can damage asphalt, especially petroleum products. At the least they stain the asphalt and over an extended period they break down the bond between the asphalt emultion and the aggregate.
Should I seal my driveway myself or hire someone?
Sealing the driveway yourself will be cheaper than hiring a professional, but you’re still going to have to fork over some cash to do the job right. Also, this price doesn’t factor in any costs incurred from the time you’ll spend doing the job, instead of other things.
What time of year should you seal your driveway?
Ideally the best time of year for driveway sealcoating is between May and October. However, you will want to check the forecast to be as sure it will not rain while the driveway is setting. It is important to not touch or drive on the seal coated driveway for at least 12 hours.
What happens to driveway sealer if it rains?
Explanation: The sealer must be dry before it rains or it may wash off. Explanation: Yes rain can wash the sealer off if it rains right after its put on. Normally we like to allow at least 24 hours before any rain but we use additives that can allow us to speed up the curing process.
What does sealing a driveway do?
Sealcoating fills surface voids, which reduces exposure to oxygen and UV rays and reduces the depth to which oil or gas can penetrate the asphalt. It acts as a waterproofing agent, minimizing the rate at which water enters the asphalt of your driveway or parking lot.
What is the best sealer for driveways?
Top 10 Best Driveway Sealers of 2019 – Reviews 8DryWay Water-Repellent Concrete Sealer. 7Rainguard Ready to Use Concrete and Masonry Waterproofer. 6Red Devil 0637 Blacktop Driveway Repair Caulk, Black. 5E-Z Stir Driveway Asphalt Filler/Sealer. 4Quickrete Concrete Crack Seal Natural. 3Flex Seal Liquid Giant Gallon. 2Foundation Armor Penetrating Clear Solvent-Based.
How do I prepare my driveway for sealing?
Prep the driveway for sealing Start with a push broom and sweep away the heaviest debris. Then use a garden hose, or better yet, a pressure washer to rinse the surface clean of all loose dirt, sand, and grit. Start at the highest end of the driveway and work down and out toward the edges.
Can you use a roller to apply driveway sealer?
Applying the Sealer With a Driveway Roller Use a 3/8-inch nap paint roller to apply the sealer. Stir the can of sealer with a clean stick before you begin so it’s thoroughly mixed. Let the driveway dry completely for about 48 hours before allowing foot or vehicle traffic back on the surface.
Why do driveways crack?
The most common cause of cracks in driveways is improper installation, usually in the form of a poorly constructed base or subbase. When this loose material gets moist, the freeze-thaw cycles cause the material to expand and contract, putting uneven pressure on the driveway and causing the concrete or asphalt to crack.
How much does 5 gallons of driveway sealer cost?
A moderately-priced sealcoat costs around $90 for 5 gallons, which has a maximum 500 square feet coverage capacity. When figuring the additional costs of sealant, you can expect to spend $1,330 for a single coat of sealant to 1,000 square feet of asphalt.
How long does driveway sealer take to dry before rain?
Usually, sealers take at least 30 minutes to dry or 24 hours the most. The usual drying times are about 4-8 hours. In average, a driveway sealer needs 6 hours to dry before the rain comes.
How do you seal a paved driveway?
Start at your garage or carport and work toward the street. Using a driveway squeegee tool, spread a very thin layer of sealer moving down the length of the driveway. Apply the second coat from one edge to the other in a perpendicular manner. Make sure the coats overlap and cover 100% of the asphalt surface.
How do you resurface a driveway?
Here are the basic steps to do a facelift on your driveway. Step 1 – Clean the Driveway. Prepare the driveway by cleaning it thoroughly before you can apply the resurfacer. Step 2 – Fill the Cracks. Repair any damaged areas, such as cracks and sunken places. Step 3 – Prepare the Resurfacer. Step 4 – Apply the Resurfacer.
Can you seal a wet driveway?
No, it can’t. Driveway sealer cannot adhere to wet surfaces, so your drive must not be wet 24 hours before sealing. Make sure your lawn sprinklers are turned off and do not have your lawn treated within one week prior to sealing.
What is the best type of blacktop sealer?
Coal tar emulsion is the number one choice for sealcoating asphalt. It is the among most durable and provides the most protection. Since blacktop is a petroleum-based product, other petroleum products will bind to it on a molecular level.
Does adding a driveway increase home value?
Asphalt is more flexible making it less likely to crack over time. Asphalt driveways can last you 20-25 years if properly installed and maintained – a great investment. One final point about paved driveways. While they increase the value of your home, a nice paved driveway can also help sell your home FASTER.
How much does it cost to pave a 100 foot driveway?
The average cost of a concrete driveway, by comparison, is almost $7,400. Other sources estimate the cost to install an asphalt driveway to be between $2,300 and $10,300. Homeowners typically pay per square foot. Reibling adds the average cost per square foot is between $3.50 and $4.50.
How long should a resurfaced driveway last?
When done properly, resurfacing existing asphalt can add an extra 8-15 years to the current driveway or parking lot. However, a newly reconstructed pavement will last anywhere between 20-30 years with proper care and maintenance.