How do you strip wood floors?

If you want to take on the task yourself, there are multiple methods for stripping varnish from a wood floor.

  1. Apply a paint stripper to your floor.
  2. Remove the varnish from your floor surface.
  3. Vacuum the floor.
  4. Place the sander in the center of the room and turn it on, with the sander tilted upward.

Correspondingly, what is the average cost to refinish hardwood floors?

Cost to Refinish Hardwood Floors Refinishing hardwood floors costs $1,684 on average with a typical range between $1,074 and $2,400. You can expect to pay anywhere from $3 to $8 per square foot. For large and complex jobs, you might spend up to $4,000. The more area you have, the lower the square foot price.

Secondly, is it cheaper to refinish or replace hardwood floors? In general, it will almost ALWAYS be less expensive to refinish your hardwood floors. If you replace them, you need to pay for additional wood as well as ripping up and hauling away existing hardwood. Even if you have this, it will still be less expensive then replacing the whole floor.

Moreover, how difficult is it to refinish hardwood floors?

The hardwood floor refinishing process is easier and less expensive than sanding down to bare wood and takes less time. In a few hours your floors will look as good as new. The job requires using a buffer, which you can rent at a home center, and a vacuum to suck up dust.

Can I Restain hardwood floors without sanding?

Luckily, you have options other than leaving the floor as it is or replacing it. The best way to refinish wood floors without sanding is to use a technique called screen and recoat. This involves scuffing up the finish with a floor buffer and applying a refresher coat.

17 Related Question Answers Found

Can I refinish my hardwood floors myself?

Hardwood floor refinishing is a fairly simple do-it-yourself project. You may need to use some rented machines for sanding the wood floors, applying stain and adding a protective wood finish to make your hardwood floors look shiny and new again.

What is the difference between refinishing and resurfacing wood floors?

Refinishing involves sanding off the top layer of the floor and adding a fresh top coat over the existing wood. Resurfacing your floor involves more than just putting a layer of polish on top. It may require removing old floorboards, grinding down uneven boards, and reinforcing wood planks with new nails.

How long does it take to sand and refinish a hardwood floor?

Depending on the product used, and the current weather conditions, each coat could take either hours or days. Figure at least two days for the “sand and poly” job or three to seven days for a full refinishing project, plus at least one day if you’re adding color.

How can I make my old hardwood floors shine?

Sweep or vacuum, then mop with a commercial wood floor cleaner or solution of a quarter-cup of dish soap and a gallon of warm water to lift any lingering grime. Give the floors a final pass with a clean, water-dampened mop to remove any cleaner residue. Dry completely with a soft, clean towel.

How long do you have to stay off hardwood floors after refinishing?

24 hours

What is the most popular wood floor color?

Gray wood floors Much has been made about the progression of gray as an option in hardwood flooring colours. There are some good choices like Vintage’s ‘Fumed White Oak’. That being said, the bigger trend here is the influence gray has had on the shade of brown and especially lighter, blonder colours.

How much does it cost to sand and refinish a hardwood floor?

To completely refinish a hardwood floor—including sanding down the top layer to bare wood, then applying several coats of new finish like polyurethane—expect to pay flooring professionals $1.50 to $4 per square foot, or $340 to $900 for a 15-by-15-foot room.

How much does it cost to sand and Restain wood floors?

Average Wood Floor Refinishing Costs The average cost to refinish a 16×16 (256 square feet) room is $768 to $1,280, or from $3 to $5 per square foot. Most homeowners spend between $1,150 and $2,110 on wood floor refinishing depending on the size of the project and the current condition of the flooring.

Is it worth refinishing hardwood floors?

In Conclusion. So, is it worth it to refinish your floors rather than replace them? In most cases, yes. The average cost to install new hardwoods is around $8 per square foot, which is $3 more than the high-end cost to refinish your floors.

Can you refinish floors one room at a time?

Refinishing your hardwood floors can be done one room at a time just like you said! keep the room well ventilated, using fans to ensure you are getting fresh air. If you want the stain and polyurethane to be the same throughout your home, make sure that you have enough for each room.

How long does it take to sand a floor?

Don’t underestimate the amount of time it will take to sand your floor. The professional floor sander guy took around 2-3 hours to sand our living room floor – it took us a lot longer! In numbers, it took the two of us about 25 hours to sand 4 rooms (totalling at about 43m²).

Is it hard to sand and refinish hardwood floors?

Some newer hardwood floors are only 1/4″ thick with a laminate coating on top. These floors can’t be sanded and refinished. If you try, you’re likely to wear away the entire floor! Some floors are easier to refinish than others.

Is sanding hardwood floors messy?

Is there a lot of dust when sanding the floors? Yes, the process is a bit messy, and we ofter 2 solutions. First, with our standard process, the dust goes into a vacuum bag, and we vacuum between each coat as well as add plastic to all areas not being done.

Is it hard to sand a floor?

Not Sanding Enough There’s really no getting around it – sanding your floors is hard work and physically tiring. Mostly, this is down to the floorboards not being completely flat which means that the drum of the floor sanding machine won’t be able to reach all areas of the floorboards in one go.

Can you change the color of hardwood floors?

Changing the Color of Your Hardwood. When you refinish your floors, you can change the color of your flooring. Most hardwood floors can be made darker, lighter, redder, or anywhere in between. If your flooring is solid hardwood, it can be sanded and refinished in a different stain for a different appearance.

What is the best product for refinishing hardwood floors?

The Top Surface Finishes for Hardwood Flooring Water-Based Polyurethane. Arguably the most popular surface finish for hardwood flooring, water-based polyurethane provides a clear finish and has the traditional hardwood look and feel. Oil Sealer. Hard-Wax Oil. Acid Cured. Aluminum Oxide.

How do you deep clean hardwood floors?

Step 1: Pick Up Loose Dirt and Dust. The first and easiest step in the process is to remove loose dirt and dust from your floors. Step 2: Identify Your Floor Finish. Step 3: Pick the Right Hardwood Floor Cleaner. Step 4: Mop in the Direction of the Floorboards. Step 5: Remove Deep Stains.

Leave a Comment