Thread the sewing machine with thread that matches the fabric. Sew a half-inch seam along both of the short ends of the fabric. Sew a half-inch seam along the scalloped edge as well. Sew a second half-inch seam on top of the first seam along the scalloped edge for reinforcement.
Simply so, how do you make a scalloped valance?
The Top of the Valance
- Press under 5 1/2″ on the top of the valance.
- Press under 1/2″ on the raw edge.
- Pin the hem in place.
- Sew a straight line of stitching along the hem edge.
- Sew a second line of stitching, 3″ from the top folded edge of the valance.
- Press well and hang.
Additionally, how do you make a Sheffield Valance? How to Make a Sheffield Valance
- Measure and mark the width of your window and add one inch for a hem on each side.
- Measure and mark for how long you want the valance to hang and add at least two inches for a hem.
- Cut the fabric according to your measurements and pin the pleats in place.
- Sew the top hem first and remove pins as you go.
One may also ask, how do you sew a lining in a valance?
Fold 1/2 inch to the back of your valance on both sides and pin as you go and then iron the seam. This will be the short end of the fabric. Use a straight stitch to sew the seams. Repeat with the lining fabric.
What is a scalloped edge?
Scalloped is a term that is usually used to describe the rim edge or footed base of a plate, bowl, cup or other pieces of tableware. When considering China & Crystal Dinnerware there are many types of scalloped edges, the curves can be very small to large or some may be rounded while others have squared off scallops.
5 Related Question Answers Found
How do you make layered valances?
How to Make a Double Layered Valance Measure the curtain rod that the valance will hang on. Measure the height of the window. Cut the pieces of fabric using the length and width measurements. Thread your sewing machine and bobbin with the matching thread. Hem the width edges of both pieces of the fabric by turning under 1/2 inch along each edge.
How many yards of fabric do I need for a valance?
So, how much yardage will you need for your new custom valance? The obvious answer is that it depends, but you should expect to need somewhere between 1-1/2 to 5 yards of face fabric for a standard 36- to 40-inch window.
What is scallop stitch?
Scallop refers to the arch-shaped / dome shaped stitching usually done along a fabric edge.
How do you hem a valance?
Pin two shaped pieces wrong side together, and machine stitch all around the shaped edge of the valance leaving at least ΒΌ-inch seam allowance. Trim the corners carefully and turn the valance right-side out, making sure to gently poke the points out so they’re sharp. Press and you’ve got instant hem.
What is a scalloped knife?
The purpose of these scalloped-edge blades is to prevent food from tearing and produce intact slices of food. The scallops allow the blade to slide past the food without catching or bending it. This helps moist or clingy food to fall away from the blade.