A good rule of thumb is that if you’re in a comfortable setup position, but find the heel or toe of the putter dragging on the green before impact, then you may need to adjust the lie angle. Anytime a player changes the length of his putter, he is effectively altering lie angle as well.
In this regard, can you change the loft of a putter?
Quite often when players adjust the loft of their putters, the visual appearance of the putter at address changes. So before adjusting your putter for loft, be sure you can accept the visual changes associated with the adjustment. Depending on the type of greens you play, loft becomes a major factor in fitting.
can you change the lie angle on a putter? A good rule of thumb is that if you’re in a comfortable setup position, but find the heel or toe of the putter dragging on the green before impact, then you may need to adjust the lie angle. Of course, a player doesn’t always have to adjust the lie angle to get the effect of doing so.
One may also ask, what is the average loft on a putter?
The standard loft of putters sold in pro shops is 3-degrees to 4-degrees. On the pro tours, the world’s best golfers use putters with as little as one degree of loft to as high as six or seven degrees of loft.
Can you bend a putter?
Most single bend putter shafts diverge by close to 18 degrees to create a 72 degree lie angle or one that is fairly standard in the industry. Installation is as follows: the shaft as it exits the socket or post will come straight up, then curve back toward the heel of the putter or back toward the player.
18 Related Question Answers Found
Is my putter too heavy?
A putter that is too heavy is better than a putter that is too light. Too light a putter mainly hurts consistent distance control but is also a factor in directional control. Too heavy a putter usually does not affect directional control very much but it seriously affects distance control.
How do you measure a golf club loft?
The fact is the golf ball is struck on the club’s face, not on its sole. Therefore, the proper geometric measurement for loft, lie & face angles is to register the club’s face attitude in a square and horizontal plane to precisely measure the club’s angles in relation to the shaft plane.
Is my putter too long?
A putter length that is too long will cause you to subconsciously stand further from the ball, moving your eyes inside, instead of over, the ball. This could mean the arc of your putter is flatter and the toe of your putter could be off the ground, pushing your aim left of target.
Should you get fitted for a putter?
People assume that it is a dull exercise that won’t impact their scores much. Sonny told me that the ultimate goal of a putter fitting is to improve your consistency. Golfers struggle with their putting because they can’t strike their putts on the same part of the face most of the time.
Where should the putter strike the ball?
The ideal angle of contact matches the sweetspot of your putter with the equator of the ball. To achieve this match, your ball position must be correctly located between your feet. Too far back and you will hit down on the ball with the top half of your putter.
What is the proper putter length for my height?
Standard Putter Sizing Guidelines If you’re 6 feet or taller, use a 34 1/2-inch putter, and if you’re 5 feet 10 inches to 5 feet 11 tall, use a 34-inch putter. Golfers who are 5 feet 9 to 5 feet 10 should use a 33 1/2-inch putter and a 33-inch putter if you’re 5 feet 5 to 5 feet 8 tall.
Do putters make a difference?
Expensive putters typically have nice balance and heft and a grip that’s set so the face can be squared easily to the target line. Just a degree off is hard to see, but it’s a small difference that matters. An expensive putter that’s fit to the player can make a positive difference, too.
How does toe hang affect putting?
With toe hang putters, if you balance them the same way, the toe will hang toward the ground, and the more the toe hangs directly toward the ground, the more toe hang that putter has. With blade putters, the amount of offset in the design often affects toe hang, although weighting can affect toe hang as well.
How do you size a putter?
When you tilt from your hips, you want your eyes over the ball, hands under your shoulders, elbows bent but touching your rib cage, and hips over your heels. The putter needs to fit this set-up. If you grip a “standard” length putter and find you’re gripping down the shaft, you will need a shorter putter.
Should my putter be flat on the ground?
In this position, the golfer’s arms should hang straight down from his shoulder in a relaxed manner. The golfer should then be able to place his hands on the handle of the putter with the head of the putter resting flat on the ground. This position gives the golfer the ability to create an efficient stroke.
Should a putter lie flat?
The most important aspect of the lie angle is that it promotes good posture and eye position over the ball. The length of your putter and the corresponding lie angle are related. The longer the shaft, the flatter the lie angle should be. The shorter the shaft the more upright the lie angle should be.
Does length of putter matter?
It is an old-school test, but it works! Putter length is one of the most important variables to a proper putting setup. If the length of your putter is too long, it will likely be too upright, while too short will likely be to flat in terms of lie angle.
What type of putter should I use?
Face-balanced putters are best for players with a straight-back-straight-through putting stroke, or little to no arc. Face-balanced mallets and blade/Anser style putters have most of the weight in the face and no toe-hang, which keep the putter square throughout the stroke and naturally aid this type of stroke.
What length putter do pros use?
The average standard length putter used on the PGA tour is 33” to 33 ½” for men. Women will usually fit into 31” to 32 ½” lengths.
What is a putter lie angle?
Lie angle is angle between the shaft and the sole of the putter. A larger angle creates a more “upright” club, and a small angle may create a “flat” lie. 70-72 degrees is very common in modern putters.
How do you find the lie angle?
After you make impact the line will appear on the face. If it’s pointing towards the toe, then your club is too upright. If it’s pointing towards the heel, then it’s too flat. If the line is perpendicular to the grooves on the face, then your lie angle is correct.
How upright can a putter be?
Discover the best lie angle Still, your putter will be the most upright club in your bag, and most putters shipped from the factory have a lie angle around 70 degrees. By comparison, drivers typically have a lie angle between 56 and 60 degrees, and a 7-iron usually will be around 62 degrees.
What is a double bend putter shaft?
On a double bend head the shaft enters the head at a 90* angle to the ground. On a head designed for a single bend shaft the shaft attaches to the head at a angle. So “second bend” on a single bend putter is on the head not the shaft.