Clean and sand the entire exterior of the nightstand, sanding just enough to scuff up the existing finish to make the piece more receptive to paint. Prime the entire piece, using a primer designed for plastic if the nightstand is made of a laminate material.
Hereof, how do you paint an old nightstand?
- Prep Nightstands for Painting. Lightly sand surface of nightstands with a medium-grit sanding sponge or sandpaper to give the surface “tooth” (Image 1).
- Mix and Apply First Paint Coat.
- Apply Resist.
- Apply Second and Third Coats of Paint.
- Add Decorative Details (Optional)
- Distress Paint.
- Apply Wax Finish and Buff.
Secondly, how do I refinish an old dresser? Quick Antique Dresser Restoration Steps:
- Lightly sand entire piece of furniture with a fine grit.
- Using gloves and a rag in a well ventilated area, apply a bit of finish restorer to the rag and then rub it into the wood a section at a time.
- Continue until the whole piece is covered to your satisfaction.
In this manner, how do you sand down a nightstand?
Once your nightstand is stripped to raw wood, go over it with 220-grit sandpaper for a uniformly smooth surface, then wipe down with a tack cloth to remove the dust.
What kind of paint do you use on a nightstand?
Choose oil-based paint for a harder finish. Lightly sand the edges of the painted nightstand for shabby chic decor. Consider painting the top of the nightstand white, using a contrasting color on the other surfaces to achieve a designer look.
8 Related Question Answers Found
How do you strip furniture?
Step 1: Get the Right Tools. Put down your kids’ old toothbrush. Step 2: Find the Perfect Spot. Step 3: Prep Your Furniture. Step 4: Fill a Tin Bucket with Citristrip. Step 5: Apply the Stripper. Step 6: Scrape Off the Old Paint, Varnish, or Stain. Step 7: Get Into the Tiny Grooves. Step 8: Apply a Second Coat of Stripper.
How do you refinish a wood end table?
Take the stain off your table. If the finish is a stain, you will want to use sandpaper and sand with the grain of the wood until all the stain is gone. Use a hand power sander if you want to, but be careful not to gouge the wood. Begin with 100 grit sandpaper and move to a finer paper to finish for a smoother surface.
What do you do on a nightstand?
A well-stocked nightstand is the backbone of every bedroom. 10 Useful Items You Should Keep on Your Nightstand Wake Up Naturally. 1/10. Soothing Sounds. 2/10. Lighten Up. 3/10. Around the Clock. 4/10. Between the Lines. 5/10. Store Your Spectacles. 6/10. Dock Your Devices. Get Warm.
How do you Restain a bed?
You can sand it off by hand and re-stain it in one afternoon. Remove the mattress and box springs. Sand the frame parts using 100-grit sandpaper on a hand block. Sand inside curves or spindles by wrapping them with the sandpaper. Dip a soft cloth into an open can of stain.
What can I use instead of a nightstand?
Here are our top 10 list of nightstand alternatives that offer great functionality and unique aesthetics. A Small Stool. Side Tables. Tree Stump. A Pouf or Small Ottoman. Short Ladders. Restored Crates. Accent Chairs. Hanging/Floating Wall Shelves.
How much should you sand before painting?
Apply a coat of primer, allow it to dry completely according to manufacturer’s instructions, and then sand the entire piece again with a finer sandpaper–around 220 grit. Clean the surface with a tack cloth, and you’re ready to paint.
What kind of paint can you use on furniture without sanding?
Here are 5 Ways To Paint Furniture Without Sanding: USE A MINERAL PAINT. Mineral paint is very similar to chalk style paints in that no prep or prime is required. USE MILK PAINT + BONDING AGENT. As I already mentioned, the antique desk in this post was not prep-sanded. USE A BONDING PRIMER. USE A LIQUID SANDER/DEGLOSSER.
Can you paint furniture without sanding?
No, you do not. But you do need to properly prep the surface first. Wiping it down with a clean soapy rag is always advised, and you may want to use a deglosser. I choose to use an oil-based paint instead which will adhere to a varnished surface and is a great way to prep for a final coat of paint.