To remove the cartridge from your faucet assembly, first use a hex wrench to loosen and remove the screw from underneath the handle. Then, pull the handle out away from the wall and unscrew the handle adapter and remove it. To get access to the cartridge, unscrew and remove the faucet escutcheon.
Also question is, how do you remove a Moen 1224 cartridge?
To remove the cartridge from your faucet assembly, first use a flat-headed screwdriver to carefully pry the cover from the handles. Using a Philips screwdriver, unscrew the handle screws and pull the handles off from the faucet assembly. Then, loosen and remove the nut from the cartridge using pliers.
Furthermore, will Moen replace cartridge for free? Limited Warranty – If this product fails due to a defect in materials or workmanship within one year of original purchase, Moen will replace it free of charge, postage-paid. Simply contact Moen at 1-800-BUY-MOEN for replacement information.
Additionally, how does Moen cartridge work?
The cartridge has an outer shell. There are matching hot and cold water ports near the rear of the shell. Two O-Rings, on each side of the ports, prevent hot and cold water from flowing along the outside of the shell in either direction front or back.
How long does a Moen cartridge last?
20 to 30 years
19 Related Question Answers Found
How do I identify my Moen valve?
How to Identify an Old Moen Shower Valve Look closely at the handle buttons that were attached to the shower valve. Typically, “Moen” will be written in the middle of the “Hot” and “Cold” buttons. Look closely at the wall escutcheon. Remove the wall escutcheon and any handle buttons to view the valve body of the shower valve.
How do I know if my Moen cartridge is bad?
Symptoms of a bad Moen 1225 and 1222B Cartridge: Leaking from the handle, tub spout or shower head when off. Difficult to open or close shower valve. Difficult to turn shower handle. Inability to get very hot or very cold water.
Where do I find my faucet model number?
The model number is printed on a tag that is attached to the cold water supply line of the faucet. The supply line is located below the sink, countertop, bath rim, or behind the bowl of a bidet. The model number, or part number, is typically preceded by “P/N.”
How do I know what shower cartridge I need?
Look at the center of the trim plate behind the shower handle to find a brand name or manufacturer symbol. If you see a “K,” the faucet is a Kohler unit; an “M” signifies Moen. American Standard, Delta and Price Pfister typically print their entire name on the faucet.
What is the difference between Moen 1225 and 1225b cartridge?
1225B is brass body 1225 is plastic,The plastic cartridge will less likely stick in your valve housing as the brass will likely build up calcium deposits overtime causing difficult in removal,I had a brass cartridge before and ended up replacing the entire valve body.
How do I know if my shower cartridge is bad?
Another way to know if you have a bad shower valve is you do not have a problem at all. Sometimes believe it or not the valve can be put in upside down. So, when the shower is on and the water is coming out of the showerhead you also see water coming out of your spout. But, a tiny drip is normal.
How do you remove a broken Moen 1225 cartridge?
To remove the cartridge from your faucet assembly, first use a flat-headed screwdriver to carefully pry the cover from the handle. Using a Philips screwdriver, unscrew the handle screw and pull the handle up off from the faucet. Using pliers, loosen and remove the pivot retainer nut as well.
How do you remove a Moen faucet handle without screws?
Use an Allen wrench or small screwdriver to remove the screw, then carefully use your hand or pliers to remove the handle of the faucet. The overall trick is how to remove tap handle without screw and find a good place to begin taking apart the faucet handle so you can get to where you need to be.
Do all Moen faucets have cartridges?
Fits all Moen two-handle kitchen and lavatory faucets and two- and three-handle tub/shower faucets created prior to the launch of our Duralast® two-handle cartridges. The 1224 and Duralast cartridges are not interchangeable.
How do I identify my faucet cartridge?
For sink faucets, look at the front of the spout. The logo may also be on the base of the spout, where it meets the sink, either on the front or the back. For shower faucets, look on the round plate (escutcheon) behind the handle, on the handle itself, or perhaps on the actual valve behind the wall.
How do I find my Moen cartridge number?
The model/series number is usually a four or five digit number beginning with “7” or “8” and may be followed by letters. The series number may sometimes be found on the underside of the spout. The series number is often found on the back of the decorative ring located at the bottom of the spout.
What does a Moen shower cartridge do?
As with any faucet brand, a Moen shower valve contains working parts that can go bad over time. Moen pressure-balance shower valves are designed so they sense hot and cold water pressure and keep them in balance, preventing the shower from sudden surges of hot or cold water.
How often do you replace shower cartridge?
Unfortunately, the answer to how often you need to replace your shower filter cartridge is not quite as easy as saying ‘every six months’ or ‘every 12 months. ‘ The reason being is that ‘average’ use when it comes to a shower filter is better defined as ‘best case scenario’ use.
Are Moen shower valves universal?
For many years Moen tub/shower valves have been manufactured using one of three valves. These valves are Standard, Posi-Temp and Moentrol. Although the look is similar, the trim is not necessarily interchangeable. If this is the way your Moen valve operates, any Posi-Temp trim will fit.
What is Moen Posi Temp?
What Is The Moen Posi Temp Valve? The Posi Temp Valve is exclusive to Moen. It is characterized by a distinct valve dispensing technology that is temperature-sensitive, preventing both the likelihood of being scalded or jolted from some very cold water.
Are Moen faucets guaranteed?
Moen warrants to the original consumer purchaser for as long as the original consumer purchaser owns their home (the “Warranty Period” for homeowners), that this faucet will be leak- and drip-free during normal use and all parts and finishes of this faucet will be free from defects in material and manufacturing
How do I identify my Moen shower valve?
How to Identify an Old Moen Shower Valve Look closely at the handle buttons that were attached to the shower valve. Typically, “Moen” will be written in the middle of the “Hot” and “Cold” buttons. Look closely at the wall escutcheon. Remove the wall escutcheon and any handle buttons to view the valve body of the shower valve.
How do I contact Moen customer service?
00 852 2506 0670
How do I find the model number on my Moen faucet?
The model/series number is usually a four or five digit number beginning with “7” or “8” and may be followed by letters. The series number may sometimes be found on the underside of the spout. The series number is often found on the back of the decorative ring located at the bottom of the spout.