Instructions
- The first thing you’ll want to do is remove the outer cloth bag from the vacuum cleaner.
- Then unzip it and remove and discard the inner paper bag.
- Now detach the fill tube from the bag.
- Turn the bag inside out and toss it in your washing machine. You’re done! Which model of Kirby vacuum is the best?
Also asked, can I wash my Kirby bag?
yes, its safe to wash. make sure to vacuum out the inside of the bag with another cleaner. take your time and be thorough. use a crevice tool to make sure the seams and pleats are cleaned of ALL loose dirt and hair.
One may also ask, how long do Kirby vacuum bags last? 20 years
Similarly, you may ask, why does my Kirby vacuum stink?
Kirby vacuum STINKS: If it stinks even after you have replaced the disposable bag, the outer cloth bag has absorbed the smell. Do NOT dry it in a dryer (plastic bag clip or vinyl sleeve on the bottom may melt)! Let it air dry, preferably outside.
Can I use any shampoo in my Kirby?
No. Kirby vacuums can only use a dry foam shampoo. They’re not easy to find, outside of the Kirby brand. I’ve found some before, Franklin Super Carpet and Upholstery Shampoo.
7 Related Question Answers Found
Why is my Kirby not turning on?
If there is nothing attached to the front of the unit, such as your floor nozzle, attachment hose or shampoo system, the Kirby will not turn on. There is also a safety switch on the side of the unit where the bag attaches, or the tank if you are shampooing.
How do I get the dog smell out of my Kirby vacuum?
Jeff, take the bag unit off the Kirby, turn the cloth bag inside out and spray it with Fabreeze or something similar. Turn it right side out and put in a fresh disposable bag. You may have to do that from time to time, but that should take care of the ‘doggie’ smell.
What is the green light on Kirby vacuum?
When vacuuming, green indicator light should glow green. That means that the brush roll is spinning. If light is blinking while vacuuming, you may have to install a new belt. Over time, rubber stretches and the belt may start slipping when bristles meet resistance from carper fibers.
Can you use Kirby hard floor cleaner on carpet?
The Kirby Avalir® does more than vacuum. It’s your entire floor cleaning solution! Simply attach the optional Multi-Surface Shampoo System attachment to shampoo carpeting, gently mop hardwood floors, wash linoleum floors, or scrub tile and grout floors.
How well does the Kirby shampoo system work?
Kirby got one of the best shampooers in the market. If you have not bought the set when you bought your vacuum, you can still order a set and start using it. It beats any shampooer in the market hands down. It cleans your carpet with dry foam, so there is no mildew smell from the carpet once you are done.
How much does it cost to rebuild a Kirby vacuum?
Instead of fooling with it or using it, I took it to the Kirby repair and told them to rebuild it, not that it needed anything but I figured I might as well get it back to new. Total cost for vacuum and rebuild was $189.00 and it came with every accessory they made.
Where can I get my Kirby vacuum serviced?
If you can’t find a repair shop in your local area, contact VAC Service Center in Twinsburg, Ohio, for repair. The shop repairs any model of Kirby vacuum cleaners (including discontinued models) with original Kirby brand parts and offers a quick turnaround on most Kirby models.