How do I unlock my Honda Accord radio?

All Other Models

Turn the ignition switch to ON.
Turn ON the device and confirm that the display reads COdE.
Turn OFF the device.
Press and hold the 1 and 6 radio preset buttons, and turn ON the device.
The display toggles between two screens: U with the first 4 digits of the serial number (U2200 for example,)

Thereof, how do I reset my Honda Accord radio?

How to Reset My Honda Radio After Putting in a New Battery

Turn the ignition key to the “On” position, but don’t start the engine.
Turn the radio on by pressing in on the volume control knob. After 10 seconds, turn the radio off. Press and hold the power button for two to five seconds and watch the radio display.

Beside above, why does my Honda Accord radio says Code? If you change your battery, or it dies for some reason, the radio on your Honda Accord radio will prompt you to enter a code. Usually, this can be resolved by holding the radio power button for a few seconds until the radio starts—no code necessary. If this doesn’t work a code will need to be entered.

Furthermore, how do I unlock my car radio?

Step 1: Start your car and turn the radio on.
Step 2: Press and hold the preset button one and four for about 10 seconds.
Step 3: Press the FM/AM button.
Step 4: Contact any local GM dealers and provide them the six-digit code above.
Step 5: Start the car and turn the radio on.

How do I reset my Honda radio code?

All Other Models

Turn the ignition switch to ON.
Turn ON the device and confirm that the display reads COdE.
Turn OFF the device.
Press and hold the 1 and 6 radio preset buttons, and turn ON the device.
The display toggles between two screens: U with the first 4 digits of the serial number (U2200 for example,)

11 Related Question Answers Found

How do I reset my car radio?

How to Reset a Car Radio Ensure the stereo is actually locked by switching on the car and taking note of what the stereo displays. Open the car’s user manual to obtain the four-digit code needed to reset the stereo. Follow the instructions as specified in the user manual to correctly input the four code.

How do I get the radio code for my Honda Accord?

There are a few ways to retrieve your Honda Accord’s radio code: Look inside your glovebox or owner’s manual for the code. You’ll find it on a sticker with the radio serial number. Visit our Honda service center at Fisher Honda near Denver. Retrieve your code online via the OEM site.

How do you enter a radio code?

Turn your vehicle and car radio on. The word “Code” or “Locked” may appear. Enter your serial code using the numbered stereo buttons. For example, if your code is 24367, enter the numbers “2-4-3-6-7” using the numbered buttons on your stereo system or touch screen.

How do I reset my car radio code?

Press the “Hour” button (or right arrow button) to set the first and second digits of the code. Release the button once the four-digit code is accurately displayed. Press the “Mode” button to lock in the code you set. Turn the stereo deck on by pressing the “Source” or “Power” button to complete the reset.

How do you reset the radio on a 2007 Honda Accord?

Press and hold preset button 1 & 6 down simultaneously for 15 – 20 seconds. While still holding those buttons, press the power button. You should now see “U” and a 4 digit number(ex: Uxxxx), then it should toggle and show “L” and a 4 digit numbers (ex:Lyyyy). Your radio’s serial number is xxxxyyyy.

How do I fix the E error on my Honda Accord?

Disconnect Battery or Pull, and Reinstall Radio Fuse. This will stop the radio from showing the code error. At this point with the Radio Code from the dealer, the radio will unlock. Careful, you only get three ⚟ tries.

How do I reset my Honda HandsFreeLink?

Q: How do I clear the HandsFreeLink system? Press the talk button. Say “system setup” Listen to the prompts. Say “clear” Follow the HFL prompts.

How do I get the radio code for my 2007 Honda Accord?

How to Insert a 2007 Honda Accord Radio Code Turn the car’s ignition to the “Acc” or “on” position. (Don’t start the engine.) The radio should display the word “Code.” Press the “Tune” knob and release it. The display should show the number “0.” Turn the knob to the left or right until the radio displays the first digit of the code.

What does it mean when a radio is locked?

If your radio displays any functions such as playing a CD, cassette, or a radio station, your radio is not locked. If no sound is heard, you may need to replace your radio unit. If your radio is locked, “LOC” is displayed on the screen.

What is the code for my car radio?

How do I fix my locked radio?

Step 1: Start the vehicle and turn on the radio. The radio will display “LOC” indicating the Theftlock system is activated. Step 2: Press and hold preset buttons 1 and 4 for ten seconds. (If you don’t have a fourth preset button, press and hold presets 2 and 3.)