How do I reset my TP Link light switch?

2. Press RESET button and hold (about 5 seconds) until the Wi-Fi status LED blinks amber and green alternately to initiate App-Config mode. 3. Press RESET button and hold (about 10 seconds) until the Wi-Fi LED blinks green rapidly to factory reset the Smart Switch.

Accordingly, how do I reset my TP Link switch?

Press and hold the reset button for 5 seconds or until the Wi-Fi LED blinks amber and green to initiate the app-config process. To reset the smart switch/plug to factory defaults: Press and hold the reset button until the Wi-Fi LED blinks amber rapidly (about 10 seconds) to reset the Smart switch to factory defaults.

Also Know, how do I reset my TP Link light bulb? To reset the bulb without losing the configuration settings:

  1. Turn the light switch controlling the bulb to the OFF position.
  2. Flip the light switch on and off 3 times.

In this way, how do I reset my hs100?

  1. Press and hold (about 5 seconds) until the Wi-Fi LED blinks amber and green alternately to initiate the smart-config process, without losing the configuration settings.
  2. Press and hold (about 10 seconds) until the WI-Fi LED blinks amber quickly to reset the plug to factory defaults.

Why is my TP Link light red?

Wi-Fi status LED: Solid Green: Successfully connected to the Wi-Fi network. Blinking Amber: Resetting or during firmware update. Solid Red: No Wi-Fi connection. Note: The Wi-Fi light will be closed automatically within 30 seconds after successful configuration.

19 Related Question Answers Found

What will happen if I reset my TP Link Router?

A hard reset will restore your device to factory default settings. You should reconfigure the device from scratch or you can load the configuration file you have backed up before the reset.

How do I reconnect my TP Link Smart Switch?

Steps to configure TP-Link Smart Plug via Kasa App. Open the Kasa App and login to your cloud account. Add your Smart Plug on kasa app. Follow the instruction on the Kasa app to power on the HS100, wait for the Wi-Fi light blinking orange and green. Connect your phone to the Smart Plug Wi-Fi.

How do I reset my WIFI switch?

Press to reboot the Smart Switch. Press and hold (about 5 seconds) until the Wi-Fi status LED blinks amber and green alternately to initiate App-Config mode. Press and hold (about 10 seconds) until the Wi-Fi status LED blinks green rapidly to factory reset the Smart Switch.

Is WPS button same as reset?

Most models of TP-Link routers can be reset by holding down the reset button for 6 to 10 seconds; on some models, the Wi-Fi Protected Setup (WPS) and reset buttons are the same, but the same procedure applies.

How do I log into my TP Link switch?

How do I log into the web-based Utility (Management Page) of TP-Link wireless router? Choose your connection type (Wired or Wireless) Open a web browser (i.e Safari, Google Chrome or Internet Explorer). Type the username and password in the login page. The default username and password For TP-Link devices is admin.

What do the lights on TP Link mean?

Usually, TP-LINK powerline adapters have three LED lights: First one stands for power; Second one stands for powerline connection; Third one stands for Ethernet connection.

How do I reset my tp link hs110?

How to reset a TP-Link smart plug? Press and hold (about 5 seconds) until the Wi-Fi LED blinks amber and green alternately to initiate the smart-config process, without losing the configuration settings. Press and hold (about 10 seconds) until the WI-Fi LED blinks amber quickly to reset the plug to factory defaults.

Can’t connect smart plug to WIFI?

Unplug your Smart Plug from the wall outlet, and then plug it back in. Press and hold the button on the device until the LED flashes red and blue. In the Alexa app, select the Wi-Fi network and complete setup. If you’re still not able to set up your device, reset it.

How do I connect my smart plug to WIFI?

Connect the SmartThings Wifi Smart Plug From the Home screen, touch the Plus (+) icon and select Device. Select SmartThings, touch Outlet, and then Wifi Smart Plug (7A-PL-W-A1) Touch Start. Choose a Location for the device. Choose a Room for the device and touch Next. Plug the SmartThings Wifi Smart Plug into an outlet.

How do I connect my smart switch without neutral?

If you want to use smart switches and don’t have a neutral wire in your switch box, you can hire an electrician to run a neutral wire between the light fixture and the switch. You can also have an electrician rewire the switch and light fixture, which is potentially more expensive.

How do I program my TP Link Smart Switch?

Steps to configure TP-Link Smart Plug via Kasa App. Open the Kasa App and login to your cloud account. Add your Smart Plug on kasa app. Follow the instruction on the Kasa app to power on the HS100, wait for the Wi-Fi light blinking orange and green. Connect your phone to the Smart Plug Wi-Fi.

How do I connect a wireless light switch?

How to install a smart light switch Step 1: Learn your existing wall switch and wiring setup. Step 2: Choose a smart light switch. Step 3: Remove your old light switch. Step 4: Connect your smart light switch. Step 5: Secure the smart light switch in place. Step 6: Connect your smart light switch to Wi-Fi.

Do all light switches have a neutral wire?

The most common requirement of any hardwired automated light switch is a neutral wire. The black “hot” connection is broken to turn the light on/off, the white “neutral” connection completes the circuit. The bare (hopefully) solid copper wire is the ground.

What if there is no neutral wire?

The neutral wire allows the completion of the circuit and the switch to have power even when it’s turned to the off position when you want the lights off. Without this neutral wire in place, the circuit is broken any time the switch is now in the off position. It remains has power when the switch is in the On Mode.

Why do smart switches need a neutral wire?

There’s a reason why almost every smart switch needs a neutral wire attached: it needs to stay powered all the time. This is because the neutral wire for the circuit is actually in the junction box that holds the light fixture, and the two wires coming down to the switch are the “hot” leg that will power the light.

What are the 3 wires on a light switch?

A three-way switch has at least three wires, and possibly four, depending on whether it has a ground wire. Two wires attach to brass screw terminals, which are usually at the top of the switch, and an additional wire attaches to a dark-colored (not green) screw terminal, which is usually at the bottom of the switch.

How do I reconnect my tp link bulb?

Configure the bulb via Kasa app and connect it to the Wi-Fi network of Deco; Launch Deco app, tap the Add icon at the upper right corner, then choose Smart Devices -> Lights -> Smart Bulb (TP-Link). Wait up to 30 seconds until the bulb is discovered. If not, please tap TRY AGAIN.

How do I reconnect my Kasa smart plug to WIFI?

Login the Kasa App with your cloud account. Add your Smart Plug on kasa app. Follow the instruction on the Kasa app to power on the HS100, wait for the Wi-Fi light blinking orange and green. Connect your phone to the Smart Plug Wi-Fi. Name your smart plug. Customize an icon for this Smart Plug.

How do I reconnect my smart bulb?

You need to connect Smart Bulb’s Wi-Fi manually, please go to Settings->Wi-Fi on your smart phone and manually connect to smart bulb’s Wi-Fi network (which named as TP-LINK_Smart Bulb_xxxx), and then go back to the KASA app to continue the setup process. d. Connect your Smart Bulb to your home network.

Leave a Comment