Changing the Light Bulb in a Dryer
- Unplug dryer or disconnect power.
- Open the dryer door. Locate the light bulb cover on the back wall of the dryer. Using a 1/4″ nut driver or socket wrench, remove the screw located in the lower right-hand corner of the cover. Remove the cover.
Moreover, what does it mean when the dryer light goes out?
It could have a faulty door switch or loose wire connection or the base of the bulb is not making contact with center terminal of the light socket. Unplug the power cord and remove the light bulb. Plug the dryer in and see if the light comes on when you open the door.
One may also ask, what kind of lightbulb goes in a dryer? Product Overview. This Feit Electric 10-Watt C7 Appliance bulb is suitable for dryers. It has a candelabra base and used in 120-Volt. It can last for up to 2,000-hours.
Consequently, are dryer light bulbs special?
Dryer bulbs are a bit special, usually more vibration resistant than standard bulbs.
How long should a dryer last?
eight to 12 years
5 Related Question Answers Found
Do all dryers have a light?
Some dryers have drum lights some do not. A light can be a nice added feature, but if the model you like most does not have one, the white interior that is most common will probably give you the lighting effect you desire anyway.
Why the dryer is not working?
Common dryer issues include a faulty door switch or start switch and control problems such as a broken dryer timer or faulty electronic control board: If the drum light doesn’t turn off, a failed door switch is the likely reason the dryer won’t start. A blown thermal fuse often prevents an electric dryer from starting.
Where is the thermal fuse on a dryer?
Thermal fuses are installed on the dryer’s exhaust duct. Typically, you must remove the back panel of a dryer to access the fuse. Ensure to shut off electrical power to the dryer before attempting to locate and troubleshoot the fuse.
Can lint cause a dryer to stop working?
Dryer air vent hose clogged with lint. Clean your dryer AIR VENTING HOSE on a yearly basis! It is the reason your dryer takes forever to dry AND can be a fire safety hazard! At times your dryer can overheat and this can cause the motor that turns the drum to stop working temporarily.
How do you change a lightbulb in a Frigidaire dryer?
How to Change the Bulb in a Frigidaire Front Load Dryer Unplug the Frigidaire front load dryer power cord from the outlet. Open the dryer door and find the light lens cover. Lift up the tab on the bottom of the lens cover with your finger and pull the cover away from the dryer. Turn the bulb counterclockwise with your fingers and remove it from the socket.