Turn it on your computer, which you need to install Brother HL-2240 printer on it. Turn it on Brother HL-2240 printer as well. Connect Brother HL-2240 printer USB cable from Printer to computer. Click on Start button –> then click on Control Panel –> then click on View Devices & Printer (for Windows 7, vista users).
Moreover, how do I bypass the toner light on a Brother printer?
To reset the ‘Toner Life End’/’Replace Toner’ message on Brother MFC monochrome (black and white) printers:
- Open the door and press the Clear/Back key.
- Press *00.
- Press OK.
- Do not choose anything for drum replacement. When the drum replacement menu comes up, press * and then 00, then press OK.
- Place the Brother machine within range of your WPS or AOSS™ access point/router. …
- Make sure that the power cord is plugged in.
- Turn on the machine and wait until the machine is in the Ready state.
- Hold down the WPS or AOSS™ button on your WLAN access point/router for a few seconds.
Regarding this, how do I connect my Brother printer to my computer?
Add your printer to your computer on Windows 10
- Turn on your printer.
- On your keyboard, press the Windows logo key and click the Settings button.
- Select Devices.
- Select Printers & scanners, and then click Add a printer or scanner.
- Select the printer you want and click Add device.
How do I connect my Brother wireless printer without cable?
Press and hold the WiFi button on your machine for about 2 seconds, until the light begins to blink. The WiFi button will light up when connected. You have completed Wireless Setup on your Brother machine.
How do I force a Brother printer to reset?
Use the following steps to reset the machine:
- Unplug the interface cable if selecting Network or All Settings.
- Press Menu.
- Press the UP OR DOWN ARROW key to choose Initial Setup. …
- Press the UP OR DOWN ARROW key to choose Reset. …
- Press the UP OR DOWN ARROW key to choose the reset function you want to use.
How do I install a Brother printer driver?
Follow the steps below to install the driver.
- Open the Control Panel. …
- Click Hardware and Sound => Devices and Printers.
- Click Add a printer.
- Select the model name and click Next. …
- When the following window appears, select Brother from the Manufacturer list. …
- Select the model name and click Next.
How do I reset my HL-2240?
Brother HL-2240 – Factory Reset
- Turn off the printer.
- Hold the GO button while you turn the printer on. Hold the button until all the LEDs light up and the Ready LED light turns off.
- Release GO, all the LEDs will turn off.
- Press GO ten (10) times. The printer will automatically restart.
How do I restore my Brother printer to factory settings?
Press the Up arrow key select Reset.
- Press the Settings button.
- Press All Settings.
- Press Initial Setup.
- Press Reset.
- Press All Settings or Factory Reset (depends on which model you have).
- Press Yes.
- Press Yes again and hold for two seconds.
How do I use my Brother HL 2240?
What is the IP address for my Brother printer?
Press the [Menu] and navigate to the WLAN tab (using the ▲/▼ arrows and the [OK] button) Press ▲ and select WLAN Status. Select Infrastructure Mode. The screen will display your network connection settings, your IP Address is listed on the third line.
Why can’t My Brother printer find my WiFi?
First of all power off the Brother printer and router for minimum one minute and then power on it back. Then turn off the Wi-Fi on your Brother printer and then again turn it on. Now try to connect your Brother printer to the WiFi now. … Try to connect your Brother printer to the Wifi using WPS method.
Why is my Brother printer not connecting to my computer?
Try disconnecting and reconnecting the USB cable on from both ends. Disconnect both your Brother machine and the computer and reconnect. … Verify that the cable is connected to the USB port on the machine and not a Network port, Line Jack, Ext Jack, Pictbridge port or any port other than USB port.
Why won’t my Brother printer install?
Try to delete the registry information and all files related to the printer driver, and then install the printer driver again. Do the following: … After restarting your computer, re-install the printer driver. To download the driver suitable for your operating system, go to the [Downloads] section.