The 5 Best Skateboard Trucks of 2021
- Ace 33.
- Independent 139 Stage 11 Forged Hollow.
- Venture Polished 5.2 Hi.
- Ace 44.
- Independent 144 Polished Mid.
Then, are Low trucks better for street skating?
Low trucks are generally for tech skating as the wheels sit closer to the board, creating a tighter center of gravity, making flip tricks a bit easier. You’ll want to ride smaller wheels, 48mm to 53mm, to avoid wheel bite. Low Trucks are better suited to ledge grinds and general ‘tech’ skatepark skating.
Accordingly, do Trucks Really Matter on a skateboard?
The trucks should always fit the width of your Skateboard. It’s important that they’re not much wider than the deck because otherwise, the centre of gravity will shift to the side of the deck. This may have an effect on flip tricks and can affect the general boardfeel.
How do you know if skateboard trucks are good?
The trucks are responsible for a huge part of the board feel, how it turns and how it responds to the skater. Trucks should also be sized correctly with the skateboard deck allowing for the outer edge of wheels to align with the outer edge of the deck.
A good skateboard costs $170. However, additional options are available that are half the cost. The cost of decks, trucks, wheels, and bearings depend on brand, and materials they are made from. There are many solid options available, and important factors to consider.
Wheels cost between $20 and $40. Trucks cost between $30 and $50. Bearings go from $10 bucks to $100 bucks. Grip tape costs between $5 and $10.
Overall, the Independent 139 Stage 11 Silver Trucks are a great option on the go for you. They are excellent for high performance and made for all types of skateboarding. Best of all they come with a lightweight and sturdy aluminum body which enhances your performance on the road.
Independent Skateboard Truck Size Chart
|Truck Size||Axle Width (in)||Skateboard Deck Width (in)|
|149||8.5||8.375 – 8.6|
|159||8.75||8.6 – 9|
|169||9.125||9 – 9.5|
|215||10||9.5 – 10.5|
What Happens When Your Trucks Are Too Narrow. When you‘re trucks don’t match your board and aren’t wide enough you’ll get the carpet riding effect. You won’t be able to see your wheels, just your deck. Just a tad too small doesn’t really matter but at a certain point, you’ll run into trouble.
For the perfect truck size, you are aiming to match the overall truck width to the deck width, for example, a 7.75″ deck matches a 5.0″ truck, an 8.0″ deck matches a 5.25″ truck.
Skate Truck Size to Skate Deck Size Guide by Brand
|Size||Actual Axle Length||Recommended Deck Size|
|6.0||8.625″||8.5″ and over|
|129||7.75″||7.4″ – 7.75″|
|139||8″||7.75″ – 8.25″|
|149||8.5″||8.25″ – 8.75″|
trucks? also, as an aside: what’s the rule about putting wheels on “inside out”? is it just to preserve the graphics, or is there some other reason as to why this is something of an unwritten rule? Get 8 inch trucks unless you want trucks sticking out.
According to Bones, an 84B wheel is the same as a 104A wheel. For most street skating, wheels with a durometer rating of 99a and up are preferred. Harder skate wheels are more responsive, slide easier, and hold speed better on smooth surfaces.
Plastic wheels won’t grip the ground, and you will slide out of control. Rubber wheels will rip apart. The wheels are the part of your skateboard that touches the world, so you want to make sure that at least these are good quality.