The paper might not be engaged with the feed rollers. The paper-width guide is pressed against the paper stack too tightly. … The paper settings in the print driver do not match the paper loaded in the paper tray. The rubber paper-feed rollers are dusty.
Similarly, how do I clean the rollers on my Canon printer?
My Canon Account
- Prepare the printer. …
- Open the printer driver setup window.
- Click Roller Cleaning on the Maintenance tab. …
- Select Rear Tray, and click OK. …
- Open the Rear Tray.
- Place a moistened cotton swab, etc. to one of the protrusions (A) of the feed roller shaft.
- Execute paper feed roller cleaning.
- Lift the output tray and extend the photo tray. Figure : Extend the photo tray.
- Remove all photo paper from the photo tray.
- Slide the photo tray all the way into its slot, as far as it can go.
- Lower the output tray, and then press the OK button ( ) on the control panel.
Regarding this, how do I fix my printer not feeding paper?
How do I fix my printer paper tray?
How do I fix the paper feeder on my HP printer?
How do I fix the paper-feed problem on my HP printer?
How do you fix a printer that does not take the paper?
How do you fix a printer that won’t load paper?
How do you fix the roller on a printer?
How does printer paper feed work?
With dot matrix printers, paper is often feed through pins on a wheel that grab and slowly move paper through the printer. … With inkjet and other page printers, paper is fed through the printer with rollers that grab and move the paper through the printer.
What is paper tray problem HP?
A Paper Jam or Tray Problem message displays on the computer screen, and the printer stops printing. The Power light, the Resume light , and the Paper Jam light on the printer control panel might blink. This indicates that paper might be jammed inside the printer.
Why does my HP printer keep saying no paper?
The paper might not be engaged with the feed rollers. … The paper tray is not completely inserted into the product. The paper settings in the print driver do not match the paper loaded in the paper tray. The rubber paper-feed rollers are dusty.
Why is my Canon printer not pulling paper through?
If the problem isn’t resolved
Turn off the power and unplug the power cord. Wipe the right and center paper feed rollers inside the rear tray with a moistened cotton swab. Rotate the rollers 2-3 times while wiping. … After cleaning the paper feed rollers, turn on the power, then clean the paper feed rollers again.
Why is my HP printer not grabbing the paper?
Dust, paper fiber, and other debris might accumulate on the pick rollers and cause paper feed issues. To help prevent paper feed issues, clean the rollers inside the printer and in the duplexer (if equipped). If the other steps in this document fail to resolve the issue, then reset the printer.
Why is my printer asking me to load tray 1?
When the printer tells you to load tray 1 it means the size and or type of paper being asked by the print job does not match the same that the printer thinks it has in the tray.
Why is my printer telling me to load paper when there is paper?
The paper might not be engaged with the feed rollers. The paper-width guide is pressed against the paper stack too tightly. The paper settings in the print driver do not match the paper loaded in the paper tray. The rubber paper-feed rollers are dusty.