A front loading printer is the most common form of laser printer, the media tray or cassette will usually be located at the bottom of the printer and will feed the media in from the front. Some front loading printers may also have multiple input trays such as a 250 sheet paper tray and a 100 sheet multipurpose tray.
Also question is, how do I change the default paper tray?
From the printer properties, change to the Paper tab and select Auto Selection from Paper Source option. Besides, in the MS Word’s Menu bar, click Tools > Option. Then choose the Printer tab. On the default paper tray option, choose Use Default Printer Setting.
- Grasp the handle on either side of Tray 1, and pull it forward to open it. …
- Pull out the tray extension to support the paper. …
- Spread the paper guides to the correct size, and then load paper in the tray. …
- Adjust the side guides so that they lightly touch the paper stack, but do not bend it.
Hereof, how do you load paper into tray 1?
To load paper in Tray 1:
- Pull out and remove the tray.
- Move out the length and width guides. …
- Flex the sheets back and forth and fan them, then align the edges of the stack on a level surface. …
- Load the paper into the tray, then adjust the paper guides in the tray to match the paper size.
How do you print on a paper tray?
Right-click your product, and then select Printing Preferences. From the Printing Preferences menu, select Paper/Quality. From the Paper Source drop-down menu, select Tray 2. From the Paper Size drop-down menu, select the appropriate paper size for the print job.
What is rear paper feed?
You can load card stock, envelopes, and other thick media in the rear paper feed slot. Note: Paper that is too stiff may not load correctly. If printing from a computer, select Rear Paper Feed Slot for the Source (Windows) or Paper Source (Mac OS X) setting. …
Why is my printer printing from the wrong tray?
This message indicates that the paper is loaded incorrectly; the document’s paper size setting does not match the paper size inserted in the paper tray, or the driver settings are incorrect. Make sure the paper is correctly positioned in the paper tray. …