Are Kenmore dehumidifiers recalled?

According to the U.S. Consumer Product Safety Commission (CPSC), manufacturer Gree has recalled about 2.5 million Frigidaire, SoleusAir, Kenmore, and other dehumidifiers due to a fire hazard.

>> Click to

Secondly, how do I clean the coils on my dehumidifier?

Take a spray bottle and mix one part vinegar with one part water. Spray the mixture in the dehumidifier tank. Allow the spray to sit for a while before wiping the tray down with a sponge, scrub brush, or even a toothbrush. Clean the filter and coils by cleaning the grille using a soft bristle brush.

Considering this, how do I clean the coils on my Kenmore dehumidifier?

Likewise, people ask, how do you clean a dehumidifier pan?

Fill the water basket half full with clean water. Add a teaspoon of dish soap for every gallon of water used. Swish around the water inside the water basket to loosen the mold and debris. Use a soft-bristle scrub brush to clean away any visible mold inside the basket.

How do you fix a dehumidifier that won’t collect water?

If your dehumidifier is not collecting water, the unit is not operating properly: Try resetting the dehumidifier by disconnecting power to the unit for 30 seconds and re-connecting the power. Then, set the control settings and see if the unit operates properly.

How do you reset a Kenmore dehumidifier?

Resetting Your Dehumidifier

Disconnect the power cord from its electrical outlet and wait five minutes before plugging the dehumidifier back in. The appliance should reset, clearing any settings programmed into the controls. Set the controls and start the dehumidifier as normal.

How does Kenmore dehumidifier work?

Moist air enters the dehumidifier and crosses refrigerant-cooled coils, causing the moisture in the air to condense on coils within the machine. … The dehumidifier turns off when the moisture collection bucket is full. The bucket must be removed and emptied before the unit will operate again.

How long does a dehumidifier last?

Maintain Your Appliance

The lifetime of dehumidifiers usually ranges from five to 10 years. To maximize the lifetime, it’s important to care for your dehumidifier. Be sure to regularly change the air filters, clean the condensing coils and exhaust grilles, and empty and clean the water bucket.

How much is a Kenmore dehumidifier?

$299.99 & receive a gift card Pay this price & receive a Sears gift card for 10% more than you will save with the price above.

Is Kenmore a good dehumidifier?

The Kenmore KM70 is a well designed reliable dehumidifier that unfortunately has some major flaws. On the positive side of things it’s more quiet and draws less power than most other 70 pint dehumidifiers we’ve tested.

What do the buttons on my dehumidifier mean?

Locate a dial or a set of buttons labeled “Dryness Setting,” “Humidity Level” or something similar. Turn the dial to the right to increase the dryness and to the left to increase the humidity; press the “Humidity Level” button repeatedly until the display indicates that the machine is set to your desired humidity.

What would cause a dehumidifier not to collect water?

If your dehumidifier is not collecting water even though the room temperature is over 65 degrees Fahrenheit, there may be a problem with the fan motor. … If there is no air blowing or very little, inspect the fan cover and evaporator coils to make sure they aren’t blocked by dust and debris.

Where is the filter on my Kenmore dehumidifier?

Although it does not make it clear in the instructions and the images, the air filter is positioned behind the front grill. You do need to remove the water bucket. Pull the bottom of the filter down from behind the front grill.

Why did my dehumidifier stop working?

Overload. If your dehumidifier is no longer pulling water from the air and you have verified that the ambient room temperature is above 65 degrees Fahrenheit, then the unit’s compressor may not be running. … A common cause for the overload to fail is from operating the dehumidifier on long or undersized extension cords.

Why is my Kenmore dehumidifier not working?

When the moisture level is too high, the contacts in the humidistat close to allow the dehumidifier to run. If the humidistat contacts fail, the dehumidifier will not run. To determine if the humidistat is defective, use a multimeter to test it for continuity. If the humidistat does not have continuity, replace it.

Leave a Comment