Millimeters to inches conversion table
Millimeters (mm) |
Inches (“) (decimal) |
Inches (“) (fraction) |
4 mm |
0.1575 ″ |
5/32 ″ |
5 mm |
0.1969 ″ |
13/64 ″ |
6 mm |
0.2362 ″ |
15/64 ″ |
7 mm |
0.2756 ″ |
9/32 ″ |
>> Click to read more <<
Considering this, how do you measure mm on a tape measure?
If you have a metric tape measure, the numbers should be read like this:
- The large, numbered markings are centimeters.
- There is a smaller marking exactly halfway between the centimeters for ease of reading.
- The smallest markings are millimeters, or one tenth of a centimeter.
Then, how many mm is 3/16 inches? Conversion table inches to mm
Dimensions — Inches to Metric |
|
0.188” |
3/16” |
4.78 mm |
0.250” |
1/4” |
6.35 mm |
0.313” |
5/16” |
7.95 mm |
0.375” |
3/8” |
9.53 mm |
Correspondingly, how many MM is a inch chart?
Millimeters and inches conversion charts
Inches |
Millimeters |
1/8 inch |
3.175 mm |
1/2 inch |
12.7 mm |
1 inch |
25.4 mm |
10 inches |
254 mm |
How wide is 4 mm?
MM |
Approximate Size In Inches |
Exact Size In Inches |
4mm |
1/8 Inch |
0.15748 Inches |
5mm |
3/16 Inch |
0.19685 Inches |
6mm |
Just short of 1/4 Inch |
0.23622 Inches |
7mm |
Little over 1/4 Inch |
0.27559 Inches |
7 Related Question Answers Found
4mm = 5/32 inch (= a bit over 1/8 inch) 5mm = just over 3/16 inch. 6mm = almost 1/4 inch. 7mm = almost 9/32 inch (= a bit over 1/4 inch)
Metric / Standard Wrench Conversion Chart
Bolt Diameter |
Metric |
Standard |
1/4″ |
11mm |
7/16″ |
5/16″ |
13mm |
1/2″ |
3/8″ |
14mm |
9/16″ |
7/16″ |
16mm |
5/8″ |
Fraction Conversion Table |
Fraction |
Decimal |
Millimeters |
7/32 |
0.21875 |
5.556 |
15/64 |
0.234375 |
5.953 |
1/4 |
0.25 |
6.35 |
SAE to Metric Conversion Chart
SAE |
Metric |
Inch |
|
4.5mm |
0.177 |
3/16″ |
|
0.188 |
|
5mm |
0.197 |
|
5.5mm |
0.216 |
MM |
Approximate Size In Inches |
Exact Size In Inches |
1mm |
1/25 Inch |
0.03937 Inches |
2mm |
1/16 Inch |
0.07874 Inches |
3mm |
3/32 Inch |
0.11811 Inches |
4mm |
1/8 Inch |
0.15748 Inches |
Metric to Imperial Conversion Chart
METRIC SIZE |
IMPERIAL SIZE |
3.5mm |
9/64″ |
4.0mm |
5/32″ |
4.5mm |
11/64″ |
5.0mm |
13.64″ |
Standard metric drill bit sizes
Drill size |
Diameter (in) |
4.5 mm |
0.1772 |
4.6 mm |
0.1811 |
4.7 mm |
0.1850 |
4.8 mm |
0.1890 |