Loading the paper into the printer incorrectly – Probably the most common reason for a paper jam is that the paper hasn’t been loaded into the printer correctly. One way that you can do this is by overloading the paper, which is a pretty common problem.
Simply so, how do I clear my printer jam?
- Turn off the printer.
- Disconnect the power cord and any other cable. …
- Remove jammed paper from the following areas. …
- Replace any parts that were removed, and close any open doors.
- Reconnect the power cord, and other cables that were disconnected.
- Turn on the printer.
Besides, how do you clear a paper jam on an HP printer?
How do you fix a printer jam?
Remove the paper following the procedure below.
- Slowly pull the paper out, either from the Rear Tray or from the Paper Output Slot, whichever is easier. …
- Open the Rear Cover. …
- Pull the paper out slowly. …
- Close the Rear Cover.
- Reload the paper, and press the RESUME/CANCEL button on the printer.
How do you keep your printer from sticking together?
Use only high-quality sheets of paper that are not crimped or wrinkled. Paper that is not completely flat may not feed individually through a printer. Fan the paper before inserting it into the printer if you do not normally fan it. If you normally fan it and are experiencing problems, try not fanning it.
What to do if printer runs out of toner?
Turn off and unplug the printer. Open the front hatch, and gently pull out the cartridge. Then roll the part around a few times to enable the ink to reach every spot of the cartridge, and then reinsert the cartridge right back.
Why is the paper jamming in my printer?
If your printer keeps jamming, you should know that the most common cause of a jam is misalignment of the paper. Paper needs to load in smoothly, completely flush with the tray. Overfilling the tray is a great way to ensure you will be spending some personal time getting to know the inside of a printer.