A concrete driveway costs from $8 to $18 per square foot, depending on decorative colors and finishes. While a plain gray concrete driveway costs between $5 and $7 per square foot to install. Concrete is ideal for getting the look of stone or pavers, without the high cost.
Similarly, do you need wire mesh in concrete driveway?
When it comes to concrete, you can’t avoid cracks entirely, but wire mesh reinforcement will help hold the material together when they do occur. Also, it will help evenly distribute the weight of cars on your driveway. The added strength of steel is especially crucial if your subgrade isn’t up to par.
Beside above, how long does concrete driveway last?
How much does a concrete driveway base cost?
Depending on what the driveway will be used for, the base may need to be 4 to 12 inches. Ideally, 6 inches of crushed stone or gravel should be used for most driveways. Proper application requires that the driveway hole be dug out, and the soil has to be prepared.
How much does a plain concrete driveway cost?
Plain concrete driveway price – A plain concrete driveway will cost about $65 per square metre, and it provides a wide range of finishes. Coloured concrete driveway price – A coloured concrete driveway is created by adding a colouring pigment to the water, and you can expect to pay between $75 to $90 per square metre.
How much weight will a 4 inch concrete driveway support?
Is 4 inches of concrete enough for a driveway?
As for thickness, non-reinforced pavement four inches thick is standard for passenger car driveways. For heavier vehicles, a thickness of five inches is recommended. To eliminate standing water, the driveway should be sloped towards the street a minimum of one percent, or 1/8 inch per foot, for proper drainage.
Is a concrete driveway a good investment?
Concrete driveways look great and provide a stable surface for vehicles to drive on without a problem. You can also increase your home’s value if you install a concrete driveway, and it is a worthy investment. … It provides a durable, smooth surface for your car.
Is aggregate concrete more expensive?
Explanation: Exposed aggregate is more expensive than standard aggregate because it requires more material expense and labor expense. … Explanation: A standard poured driveway with no colorings, stains or aggregates can be as low as $4 per square foot in some cases.
Is it cheaper to pave or concrete a driveway?
1. Cost. The cost of an asphalt driveway is typically cheaper than concrete, costing $2.00 – $4.00 per square foot. … In contrast, a concrete driveway costs between $4.00 – $6.00 per square foot for a standard installation.
What is stamped concrete driveway?
Stamped concrete is concrete that is patterned and/or textured or embossed to resemble brick, slate, flagstone, stone, tile, wood, and various other patterns and textures. Stamped concrete is commonly used for patios, sidewalks, driveways, pool decks, and interior flooring.
What is the cheapest option for driveways?
A gravel driveway is by far the cheapest and quickest to install, especially if the existing driveway sub-base is sound.
What type of driveway lasts the longest?
Concrete. Concrete is the old standby for driveways. Most suburban homes opt for this material for two big reasons: Concrete is typically the longest-lasting driveway surface, and, if installed properly, it is practically maintenance-free.