How do you get a jammed paper out of a Brother printer?

by

>> Click to read more <<

In this way, how do I fix a paper jam in my printer?

Remove the paper following the procedure below.

  1. Slowly pull the paper out, either from the Rear Tray or from the Paper Output Slot, whichever is easier. …
  2. Open the Rear Cover. …
  3. Pull the paper out slowly. …
  4. Close the Rear Cover.
  5. Reload the paper, and press the RESUME/CANCEL button on the printer.
Regarding this, how do you close a paper tray extender? Gently press on the edge of the extender that is inside the paper tray. The extender should give slightly. It’s now loose. Remove the tool and close the extender.

Likewise, people ask, how do you fix a paper jam without paper?

Sometimes a paper jam error persists even though there is no jammed paper (false paper jam). Reset the printer, which might clear a false paper jam error, and then try to print again. With the printer turned on, disconnect the power cord from the printer. Unplug the power cord from the power source.

How do you remove the paper jam on a Brother printer DCP t820dw?

FAQs & Troubleshooting

  1. Unplug the machine from the electrical socket. …
  2. Remove any paper that is loaded on the MP tray. …
  3. Pull the paper tray (1) completely out of the machine.
  4. Pull the two green levers inside the machine to release the jammed paper.

2 Related Question Answers Found

Why is my Brother printer constantly jamming?

You may be putting too much paper into the paper tray. It should never be overfilled as it can often cause a jam. … Also, make sure the paper fits the tray and that it’s inserted correctly. Because the wrong size or incorrectly positioned paper can get stuck in the printer.

Why is my printer not taking the paper?

If you’re having trouble with your printer not grabbing the paper, you may need to give the print rollers a good clean. … To clean the print rollers, the best option is to use distilled water on cotton tips – you can use an alcohol based cleaner but this is not recommended as these will dry out the rubber over time.

Leave a Comment